[NSRCA-discussion] a picture for you
Jay Marshall
lightfoot at sc.rr.com
Sun Dec 16 03:09:37 AKST 2007
Where do you get the Blucor?
Jay Marshall
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of george w.
kennie
Sent: Saturday, December 15, 2007 10:09 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] a picture for you
Ken,
I've had tons of fun experimenting with this Blucor flat foam stuff. Built
them in sizes from 30" to 47.5" W.S. The basic problem with all these low
mass aircraft is that they have too low a wing loading so they are highly
susceptable to even slight air turbulence making it a real chore to try to
get them to groove, or at least make it look like they are grooving. On the
other hand, they can be flown in winds that you wouldn't fly even a sport
bird and can be made to fly backwards fairly fast in strong winds at reduced
throttle settings. Gets lots of shouts from the peanut gallery !
Some guys claim that the instability is caused by the lack of airfoil, but I
have one of the 47.5" jobs that is amazingly smooth equaling a good 46 size
glow ship and even handles very well in moderate breezes.
The great part about the fun enhancement is the fact that you can throw one
together in just a few days from drawing the outline to arriving at the
flying field. They're not indestructable, but if you can fly attentatively
you can make them last for quite some time as I have one that is 3 &1/2
years old now. Configurations can include built-up, profile, or what have
you, the limitations are your imagination.
With batteries now costing < $20 for 1600 ma, you can basically fly all day.
I bought 3 sets for $65 (total) and they come with the high current Deans
connector already soldered on.
Blucor material cost runs $1.25 / model. You can pick up a Hitec 05S
receiver for 23 bucks from Tower and it has sixth channel function on
channel five enabling flaperon control which can really spice things up if
you're so inclined.
Oh, I tried one out of Depron and didn't like working with that material.
The Blucor is much more user friendly.
I hope I didn't overwhelm you and give you more than you asked for, but I
get a little caried away, so please forgive me if I came on too strong.
Georgie
----- Original Message -----
From: Ken Thompson <mailto:kthompson at stx.rr.com>
To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>
Sent: Saturday, December 15, 2007 6:15 PM
Subject: Re: [NSRCA-discussion] a picture for you
Hey Georgie,
For me, crashing seems to part of the testing program, no shame in that.
If you could do me a favor and keep me informed with your progress, it's an
sweet looking plane!
----- Original Message -----
From: george w. kennie <mailto:geobet at gis.net>
To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>
Sent: Saturday, December 15, 2007 4:54 PM
Subject: Re: [NSRCA-discussion] a picture for you
Hi Ken,
Yup, .....crashed it too. Trying to hover too close to the ground on low
rates. It was a design effort to try to achieve a small foamy (15 oz.) that
would track like a larger model and it came close, thus the name (being
electric). Have another one that I scaled down to two/thirds size and
maintained all the good virtues. An overall fun exercise.
Just wanted to see if I had mastered the "photo to list" quandry. Not sure
if I can do it again.
Georgie
----- Original Message -----
From: Ken Thompson <mailto:kthompson at stx.rr.com>
To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>
Sent: Saturday, December 15, 2007 5:31 PM
Subject: Re: [NSRCA-discussion] a picture for you
Pretty plane Georgie!!
Have you flown it yet?
----- Original Message -----
From: george w. kennie <mailto:geobet at gis.net>
To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>
Sent: Saturday, December 15, 2007 4:17 PM
Subject: [NSRCA-discussion] a picture for you
O.K., let's see if it works !
You have been sent 1 picture.
airplanes 009.jpg
These pictures were sent with Picasa, from Google.
Try it out here: http://picasa.google.com/
_____
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_____
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_____
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_____
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20071216/f2f13450/attachment-0001.html
More information about the NSRCA-discussion
mailing list