[NSRCA-discussion] Offset in program mix

[Kurt Bozarth]

I use my right slider to mix in elevator when I go to my landing mode.  This
allows me to trim for a slower airspeed without messing up my in-flight
elevator trim.  I use -100% offset in the mix to allow the slider to become
effective over its entire range.  I mix in a max of 10% of up elevator.

 

Without the offset, the mix would not start until I moved the slider through
the middle position (i.e. the slider would not have an effect until I moved
it at least half way).  The offset makes it fully proportional in generating
0 to 10% mix from the slider's stop to stop.



 

 

Kurt Bozarth

MA Pylon Contributing Editor (2004-2007) 

 

 

 

 

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of James Oddino
Sent: Thursday, August 23, 2007 5:56 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] Offset in program mix

 

 

I'll bet there isn't anyone in the USA who can explain how the offset  

function in Futaba 9Z Program Mix works and how one would use it.   

Anyone?  Maybe a helicopter guy?

 

Jim O

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070824/43dfa809/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3292 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070824/43dfa809/attachment.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3274 bytes
Desc: not available
Url : http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070824/43dfa809/attachment-0001.jpe