[NSRCA-discussion] YS Idle

[Matthew Frederick]

I thought he had indicated he had rebuilt the regulator and replaced the 
bearings... that's why I didn't mention it.

----- Original Message ----- 
From: "Ron Van Putte" <vanputte at cox.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, August 16, 2007 7:37 AM
Subject: [NSRCA-discussion] YS Idle


>I saw a request for help with a YSA that had set around a while and
> the responses to the request.  It just occurred to me that nobody
> mentioned what may be the source of the problem.  I had this problem
> with a YS that set up for a year.  I discovered that the "plunger" in
> the pressure regulator was the culprit.  If you take off the cover of
> the regulator and remove the diaphragm, you'll see the plunger.  It's
> the little brass "piston".  I am willing to bet that the shank of the
> plunger is green.  If you clean the green gunk off the shank of the
> plunger and clean out its receptacle, I bet the idle will improve.
>
> Ron Van Putte
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>