[NSRCA-discussion] Nose-Rings: O-ring replacement forCHnosering?

[Matthew Frederick]

I did something similar to what Mike is suggesting, but rather than getting "primitive" on the o-ring, I went "medievel" on the nose ring itself. Using the little round ball grinder on my dremel I was able to shave away at the metal without deforming the grove. Went around it a few times and kept test fitting the nose ring with the original o-ring in it until it just slipped on. I did it this way so as not to take away from having as much rubber as I could between the engine and the metal.

Matt
  ----- Original Message ----- 
  From: Mike Hester 
  To: NSRCA Mailing List 
  Sent: Wednesday, August 08, 2007 1:27 PM
  Subject: Re: [NSRCA-discussion] Nose-Rings: O-ring replacement forCHnosering?


  Merle Hyde. This is the series of events that lead to the AR80 mount.....

  -Mike

     heard about it from Arch who heard about it from Mike who heard about it from...

    Gotta' love the sharing of info!!

    Ken



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070809/68f75765/attachment.html