[NSRCA-discussion] Items for sale

[ronclark51 at comcast.net]

2-used S9150 digital servos $60.00
Used Hyde mount for a YS four stroke, uses a nose ring $50
New Bolly curved carbon gear $40
Used 1.4 YS runs great $250
Four stroke carbon fiber pipe, mounted once $60

New APC's $6.00 ea.
14x14n
14.5x14n
2-14.5x14.5n
2-15x14n
2-15x13
5-15x13n

Good Used APC's $4.00 ea

15x12
14x14
14.5x14.5
15x14n
15x13
16.5x13
17x8
17x12
17x12n
2-17x10
2-15x13n
2-16x13n
2-15.5x13n

Titan Pattern plane For sale. It is about 90% complete. Mainly needs some mono-kote work. Setup for YS, has a CF nose ring and a Hyde clone mount. Contest grade balsa was use through out for construction. The adjustable wings were vacuum bagged with full carbon fiber vail between the foam and balsa. Very light and strong. The plane will finish @ just over 10 lbs. Included are, Bolly carbon gear and pants, carbon fiber wing tube. The tail is setup with a push rod / bell crank on elev. The rudder is Pull-Pull.  The stab is removable and adjustable.   $350.00 shipped in the US
This will make someone a great plane................. 

Please reply off line ronclark51 at comcast.net
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070429/07aab832/attachment.html 
-------------- next part --------------
An embedded message was scrubbed...
From: "jfgreen" <jf217green at cmc.net>
Subject: [NSRCA-discussion] Pinnacle CG
Date: Sun, 29 Apr 2007 17:35:23 +0000
Size: 694
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20070429/07aab832/attachment.mht