[NSRCA-discussion] berg 7 channel Rx

[Scott Anderson]

The Berg 6 is not the same RX...

Scott Anderson
----- Original Message ----- 
From: "Robert Mairs" <robertm at sssnet.com>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, September 13, 2006 4:03 PM
Subject: Re: [NSRCA-discussion] berg 7 channel Rx


>I used the berg 6 a couple of years ago with the wc2.  2 different rx's, in
> 2 diff planes.  One locked out in knife edge and finally hit the ground
> about a 1/2 mile away, other took off, got 20' into the air and straight
> down at full throttle.  This was after ground range cks.  Failsafe was set
> to go to idle, which it never did in either case.
>
>
> ----- Original Message ----- 
> From: "Michael Wickizer" <mwickizer at msn.com>
> To: <nsrca-discussion at lists.nsrca.org>
> Sent: Wednesday, September 13, 2006 3:34 PM
> Subject: Re: [NSRCA-discussion] berg 7 channel Rx
>
>
>> Scott:
>>
>> Your are saying that the Rx doesn't work with the WCII at all?  I did 
>> read
>> that it didn't work with the Synthesized module but thought it was ok
>> otherwise.
>>
>>
>>>From: "Scott Anderson" <scott at rcfoamy.com>
>>>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>>>To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>>>Subject: Re: [NSRCA-discussion] berg 7 channel Rx
>>>Date: Wed, 13 Sep 2006 15:26:25 -0400
>>>
>>>Mike,
>>>
>>>They work great and can be programmed via a castle link to change several
>>>options..
>>>The only TX right now that has a issue is the WCII w/o and with the
>>>synthesizer tx module..
>>>The RX  learns the footprint of your TX and is auto shift.. Some of the
>>>testing we have done ids have it flying and have a TX on the same channel
>>>turn on and there has not been any issues... Granted it is not
>>>recommended,
>>>but some of the sponsored guys have been playing with this...
>>>Hope this helps..
>>>
>>>Scott Anderson
>>>Team Castle Creations
>>>Team Tanicpacks.com
>>>
>>>
>>>----- Original Message -----
>>>From: "Michael Wickizer" <mwickizer at msn.com>
>>>To: <nsrca-discussion at lists.nsrca.org>
>>>Sent: Wednesday, September 13, 2006 1:24 PM
>>>Subject: [NSRCA-discussion] berg 7 channel Rx
>>>
>>>
>>> > Anybody have experience with these receivers?  At only 8 grams, sure
>>>would
>>> > be a weight savings in electric applications.
>>> >
>>> > http://www.castlecreations.com/products/berg_7-channel.html
>>> >
>>> > Mike
>>> >
>>> >
>>> > _______________________________________________
>>> > NSRCA-discussion mailing list
>>> > NSRCA-discussion at lists.nsrca.org
>>> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> >
>>>
>>>_______________________________________________
>>>NSRCA-discussion mailing list
>>>NSRCA-discussion at lists.nsrca.org
>>>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>