[NSRCA-discussion] Partner set-up question

Koenig, Tom Tom.Koenig at actewagl.com.au
Tue Oct 17 14:18:32 AKDT 2006


Hello Claude and all,

These are the measurements I came up with. Please-if anyone has other data it would be interesting to compare. First up nothing earth shattering as far as the numbers are concerned. Quite standard actually.

Partner

With reference to the canopy floor.

Datum line/spinner center    56 mm below canopy line
wing center                        92 mm below canopy line( or 36 mm below datum line)
stab center                        63 mm below canopy line( or 7 mm below datum line)


Lazulite

With reference to the canopy floor.

Datum line/spinner center    56 mm below canopy line
wing center                        90 mm below canopy line( or 34 mm below datum line)
stab center                       57 mm below canopy line( or 1 mm below datum line)

I presume that with the stab center on the Lazulite, I may have made an error in measurement and that the stab is actually located ON the datum line( it was getting late!)


The models are actually very similar, with a bit of coaxing the Lazulite Canopy will fit on a Partner and vice versa.

I have not compared 1/4 chord to 1/4 chord moments-but if these are wanted I'll measure that up as well.

The Lazulite was disgustingly close ( by millimeters) to my own Merlin design.I'm still kicking myself for the cash that was 'burnt'.

Hope it is of help.


Tom



-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Claude Weimer
Sent: Tuesday, 17 October 2006 8:52 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Partner set-up question



Tom,



No one else has responded.  I would really appreciate if you could give me the information. I can deal with metrics if that's what you use.



Thanks, Claude






  _____ 


From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Koenig, Tom
Sent: Monday, October 16, 2006 4:20 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Partner set-up question



Claude,



Have you had any answers yet?



If not-I'll measure up my unbuilt one and see what the numbers are. I hope they will make sense with the results from others?



Tom

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Claude Weimer
Sent: Monday, 16 October 2006 12:53 PM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Partner setup question

Can some one tell me the distance below the engine thrust line to the centerline of the wing on the Partner? And I would also like to know the distance above the wing centerline to the center of the horizontal stab. Thanks, Claude.

************************************************************************
*PLEASE NOTE* This email and any attachments may
be confidential. If received in error, please delete all
copies and advise the sender. The reproduction or
dissemination of this email or its attachments is
prohibited without the consent of the sender.

WARNING RE VIRUSES: Our computer systems sweep
outgoing email to guard against viruses, but no warranty
is given that this email or its attachments are virus free.
Before opening or using attachments, please check for
viruses. Our liability is limited to the re-supply of any
affected attachments.

Any views expressed in this message are those of the
individual sender, except where the sender expressly,
and with authority, states them to be the views of the
organisation.
************************************************************************




************************************************************************
*PLEASE NOTE*  This email and any attachments may
be confidential. If received in error, please delete all
copies and advise the sender. The reproduction or
dissemination of this email or its attachments is
prohibited without the consent of the sender.

WARNING RE VIRUSES:  Our computer systems sweep
outgoing email to guard against viruses, but no warranty
is given that this email or its attachments are virus free.
Before opening or using attachments, please check for
viruses.  Our liability is limited to the re-supply of any
affected attachments.

Any views expressed in this message are those of the
individual sender, except where the sender expressly,
and with authority, states them to be the views of the
organisation.
************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061017/c138e86b/attachment.html 


More information about the NSRCA-discussion mailing list