[NSRCA-discussion] Y.S. 160 DZ

[Lyle Laughery]

Bob -Thanks for the information.My good friend Bill Bowen is using that very prop with excellent results on his Mantis which is a generic copy of the Enigma.It looks like I may be purchasing another spinner from Central .lyle
  ----- Original Message ----- 
  From: Bob Kane 
  To: NSRCA Mailing List 
  Sent: Thursday, October 12, 2006 8:54 PM
  Subject: Re: [NSRCA-discussion] Y.S. 160 DZ


  If you can stand a two blade prop, the YS160 loves the APC 18.1X10 prop (LP18110). Great pull, great breaking. Central Hobbies has them, but you will have to ask, they are not listed on the website.
   
  Bob Kane
  getterflash at yahoo.com 



  ----- Original Message ----
  From: Lyle Laughery <lclaughery at verizon.net>
  To: NSRCA-discussion at lists.nsrca.org
  Sent: Thursday, October 12, 2006 6:41:16 PM
  Subject: [NSRCA-discussion] Y.S. 160 DZ


  My winter building project is a ZN-Line Enigma Y.S. 160 DZ powered.I would like to try a three bladed prop.Any good choices to get best constant speed .Thanks.-Lyle Laughery NSRCA1288
  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion






------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061013/601aef85/attachment.html