[NSRCA-discussion] New maneuver for Masters or FAI

[Gray E Fowler]

Dave

I designate you as the tester of this manuever-you can do it straight. It 
looked really cool, but is it hard? I expect a report back this time next 
week.



Gray Fowler
Senior Principal Chemical Engineer
Radome and Composites Engineering
Raytheon



DaveL322 at comcast.net 
Sent by: nsrca-discussion-bounces at lists.nsrca.org
10/03/2006 10:51 AM
Please respond to
NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>


To
NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>, "NSRCA Mailing 
List" <nsrca-discussion at lists.nsrca.org>
cc
"Atwood, Mark" <atwoodm at paragon-inc.com>
Subject
Re: [NSRCA-discussion] New maneuver for Masters or FAI






Make it into a rolling circle! <G>

Dave
 
-------------- Original message -------------- 
From: "Atwood, Mark" <atwoodm at paragon-inc.com> 
Nah…he had it right. You reverse roll direction each time. ¾ right, 5/4 
left, ¾ right, 5/4 left…or the opposite. It’s a cool maneuver…just not 
sure there’s enough box…
 

From: nsrca-discussion-bounces at lists.nsrca.org 
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Fred Huber
Sent: Tuesday, October 03, 2006 11:21 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] New maneuver for Masters or FAI
 
3/4 + 5/4 = 8/4 =2 which would be upright, not inverted...  3/4 + 3/4 
would be 6/4 = 1.5 which is inverted... so it probably was 3/4 of a roll 
for each point.
----- Original Message ----- 
From: Gray E Fowler 
To: NSRCA Mailing List 
Sent: Tuesday, October 03, 2006 8:54 AM
Subject: [NSRCA-discussion] New maneuver for Masters or FAI
 

I just went to the Fort Worth airshow and I saw a maneuver that is so cool 
that some class above me needs to adopt it. 
I am going to try to remember how it went.....it is a 4 point roll 


from straight flight 

3/4 roll right to knife edge (belly of the plane) 
5/4 roll left to inverted 
3/4 roll right to knife edge (top of the plane) 
5/4 roll to upright. 

Anyone ever see this and does it have a name. I may have gotten it 
slightly wrong, as it took me by surprise. It was Frank Ryder and the 
Oreck vacuum cleaner powered plane-Cyclone.


Gray Fowler
Senior Principal Chemical Engineer
Radome and Composites Engineering
Raytheon 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.12.12/461 - Release Date: 10/2/2006
----- Message from "Atwood, Mark" <atwoodm at paragon-inc.com> on Tue, 3 Oct 
2006 15:44:06 +0000 -----
To:
"NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Subject:
Re: [NSRCA-discussion] New maneuver for Masters or FAI
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061003/c86b6029/attachment.html