[NSRCA-discussion] Pipe Length

[Bill Cripe]

-----Original Message-----
From: "Dr. Mike Harrison" <drmikedds at sbcglobal.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: 11/28/06 1:29 PM
Subject: Re: [NSRCA-discussion] Pipe Length

Also, Get the EFI rear bearing and install.  Your low end needle should be about 2 oclock.
Mike
  ----- Original Message ----- 
  From: Dave Smith 
  To: NSRCA Mailing List 
  Sent: Tuesday, November 28, 2006 2:46 PM
  Subject: [NSRCA-discussion] Pipe Length


  What would be a good starting point to set an ES tuned pipe,Model 2C 140MU on an OS 140 RX,(w/extra head shim and OS "F" plug),running on Cool Power 20/20?

  Prop is APC 18.1x10.1W.

  Thans,Dave  NSRCA  #943


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion