[NSRCA-discussion] 4 blade spinner

[Anthony Romano]

Kelly,
To simplify use a 17*12 or 16.5*12W and start flying. Later in the year and 
as your experience grows you can start playing with props and spending money 
on spinners.

Anthony


>From: Kelly Regan <kelly.regan2 at verizon.net>
>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>Subject: Re: [NSRCA-discussion] 4 blade spinner
>Date: Tue, 21 Nov 2006 15:43:06 -0500
>
>I don't have an extra back plate laying around so I need to purchase the
>complete spinner and backplate to get started.  Once I have it flying I can
>always try different props without a spinner,  not very Formula 1 like, but
>you know!  ;)
>
>Bill e mailed me with a 4 blade and spinner used, but now I am not sure
>about the 4 blade prop.
>
>One thing I have learned,  pattern plane setups are not cut and dried.
>.
>
>Nat Penton wrote:
> > Kelly
> > If you try the 4 blade do it with any backplate, only, before buying the
> > spinner.  I'm surprised someone hasen't offered you a used spinner.
> > Nat
> >
> > ----- Original Message -----
> > From: "Kelly Regan" <kelly.regan2 at verizon.net>
> > To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> > Sent: Tuesday, November 21, 2006 2:01 PM
> > Subject: Re: [NSRCA-discussion] 4 blade spinner
> >
> >
> >
> >> That is where I was looking, Central Hobby.  They do not list a 4 blade
> >> TT spinner
> >> larger then 3".
> >>
> >> Now with the other posts on the 4 blade I am not sure what to get.
> >> Maybe I will stick with a 2 blade for now and try out the 4 blade in 
>the
> >> summer.
> >>
> >>
> >>
> >>
> >> Nat Penton wrote:
> >>
> >>> You can save about 35% if you buy the TT spinner from someone like
> >>> Central.
> >>> TT direct will nail you.
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "Kelly Regan" <kelly.regan2 at verizon.net>
> >>> To: <NSRCA-discussion at lists.nsrca.org>
> >>> Sent: Monday, November 20, 2006 9:39 PM
> >>> Subject: [NSRCA-discussion] 4 blade spinner
> >>>
> >>>
> >>>
> >>>
> >>>> I am getting ready to order the last few items for my 140RX
> >>>> powered Brio.
> >>>>
> >>>> I read some good things about the APC 15.5 x 12 4 blade
> >>>> prop and thought I would give that a try.
> >>>>
> >>>> My problem is I don't see a 4 blade spinner in 3 3/8" or 3 /1/2"
> >>>> that will fit the Brio.   3" looks way to small and I think it might
> >>>> look funny on the Brio.
> >>>>
> >>>> Any idea's ?
> >>>>
> >>>>
> >>>> --
> >>>> ______________________________________________
> >>>>
> >>>> Kelly Regan
> >>>> www.reganbrothers.com
> >>>> Home Page: http://mysite.verizon.net/vze6uror/
> >>>> ______________________________________________
> >>>>
> >>>> _______________________________________________
> >>>> NSRCA-discussion mailing list
> >>>> NSRCA-discussion at lists.nsrca.org
> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>>
> >>>>
> >>>>
> >>>> --
> >>>> Internal Virus Database is out-of-date.
> >>>> Checked by AVG Free Edition.
> >>>> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
> >>>> 10/31/2006
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >> --
> >> ______________________________________________
> >>
> >> Kelly Regan
> >> www.reganbrothers.com
> >> Home Page: http://mysite.verizon.net/vze6uror/
> >> ______________________________________________
> >>
> >> _______________________________________________
> >> NSRCA-discussion mailing list
> >> NSRCA-discussion at lists.nsrca.org
> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>
> >>
> >>
> >> --
> >> Internal Virus Database is out-of-date.
> >> Checked by AVG Free Edition.
> >> Version: 7.1.409 / Virus Database: 268.13.20/508 - Release Date:
> >> 10/31/2006
> >>
> >>
> >>
> >
> >
> >
> >
>
>--
>______________________________________________
>
>Kelly Regan
>www.reganbrothers.com
>Home Page: http://mysite.verizon.net/vze6uror/
>______________________________________________
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_________________________________________________________________
All-in-one security and maintenance for your PC.  Get a free 90-day trial! 
http://clk.atdmt.com/MSN/go/msnnkwlo0050000002msn/direct/01/?href=http://clk.atdmt.com/MSN/go/msnnkwlo0050000001msn/direct/01/?href=http://www.windowsonecare.com/?sc_cid=msn_hotmail