[NSRCA-discussion] Masters Square 8

[rcmaster199 at aol.com]

Scott,
 
The way this maneuver's entry is worded leads you to believe that the last horizontal leg is lost. It needs to be re-worded in the next rule cycle to eliminate ambiguity. 
 
Matt
 
 
 
-----Original Message-----
From: js.smith at verizon.net
To: nsrca-discussion at lists.nsrca.org
Sent: Mon, 20 Nov 2006 7:03 AM
Subject: Re: [NSRCA-discussion] Masters Square 8


Sorry if I missed it but did we ever get a consensus on this?  That is, where does judging start?  
 
The rule book description says:  Square Horizontal Eight: Model pulls up and commences a square loop, when at the bottom of the third leg...
 
So I believe the maneuver starts at the upwind push.  I think we need to be clear on this since it's possible to fly the preceding humpty so close to center (with a pull at the top) that the final quarter loop takes you past center (this is a very good thing if you're trying to minimize exposure while inverted!), yet still leaving a 30M line between maneuvers.  
 
How would you score it? (Please leave S&G and pace out of the equation and respond just on technical merit.)  
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Rcmaster199 at aol.com
Sent: Sunday, November 12, 2006 11:25 AM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Masters Square 8


The rule book is explicit on balanced center maneuvers of this type, as Don pointed out.
 
If one were to break the maneuver into its elements, the start is at Center at the initiation of the first inverted S&L (1st element), prior to the first push into first radius (2nd element). There must be a 15m S&L prior to center. 
 
The end is after the last radius at center, which makes the first element (inverted hor line) and last element (1/4 loop) tangent. And there must be the obligatory 15m S&L past center at the end. 
 
It seems that some are arguing whether the short line segment of the first element immediately past Center, which is covered by the last radius at exit, should be included or excluded from the maneuver entry. It's a valid argument and it seems to be a grey area, but is a moot point. Either way, the short line segment has to be covered by at least the initial 15 m S&L line prior to the start.
 
In another point of view, Nits are people too and if we didn't Pick on them, there'd be little point to the discussion board (VBG)
 
Matt
 
 
 
In a message dated 11/12/2006 8:24:21 AM Eastern Standard Time, schale at optonline.net writes:
" As for scoring, I'm not entirely sure it matters.
Don"

What Don said is probably true.  Agreed there is a long inverted flight
before the first push to vertical in the horizontal eight and after the
humpty bump.  If someone is weaving, or changing altitude during this
portion, the judge is going to downgrade one of the two maneuvers.  I would
think if there was a reasonable straight and level after the humpty then the
rest is judged on the horizontal eight.  Do we really have segments of
flight that should not be judged or added to a downgrade for anything but
straight and level?

Stuart Chale

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Don Ramsey
(CoxNet)
Sent: Saturday, November 11, 2006 8:40 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Masters Square 8

Lance,

I believe it starts at center. Straight line before center and start at 
center.  The reason I say that is rule 14.1 which says "Each time the model 
passes before the judges, a maneuver is executed, except after takeoff and 
landing."  Of course, some maneuvers start before center as the slow roll, 
etc. As for scoring, I'm not entirely sure it matters.

Don

----- Original Message ----- 
From: <jivey61 at bellsouth.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Saturday, November 11, 2006 7:16 PM
Subject: Re: [NSRCA-discussion] Masters Square 8


> Lance
> You will have to have a entry line before the push to vertical past
> center.This is where I think it starts... at the start of the entry line.
>
> Jim Ivey
> ----- Original Message ----- 
> From: "Lance Van Nostrand" <patterndude at comcast.net>
> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> Sent: Saturday, November 11, 2006 7:51 PM
> Subject: Re: [NSRCA-discussion] Masters Square 8
>
>
>> OK,so where does the manuver begin and end?  At center, the radius after
>> center, at the first corner initiation?
>>
>> --Lance
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
________________________________________________________________________
Check out the new AOL.  Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061120/8f16fa7c/attachment-0001.html