[NSRCA-discussion] Genesis dihedral

Del K. Rykert drykert2 at rochester.rr.com
Mon Nov 13 06:15:39 AKST 2006


Howdy Bob..  You passed here.. 
 
    Del
  ----- Original Message ----- 
  From: Bob Stevens 
  To: NSRCA Mailing List 
  Sent: Monday, November 13, 2006 9:27 AM
  Subject: Re: [NSRCA-discussion] Genesis dihedral


  TEST
    ----- Original Message ----- 
    From: Verne Koester 
    To: NSRCA Mailing List 
    Sent: Sunday, November 12, 2006 10:52 PM
    Subject: Re: [NSRCA-discussion] Genesis dihedral


    Thanks Ron. If your kit wings are like mine, there's no way to check. With the wing in the shuck, the trailing edge is parallel to the table, root to tip. The wing root is exactly perpendicular to the table. My wing tube is a little sloppy so I can't say for sure but it appears to be parallel to the table as well. All of that adds up to no dihedral, but I find that hard to imagine. As I understand it, the only way no dihedral works is if the wing and stab are on the thrust line. I'd be interested in knowing what you find with yours if you have the time.

    Thanks,
    Verne
      ----- Original Message ----- 
      From: Ron Barr 
      To: NSRCA Mailing List 
      Sent: Sunday, November 12, 2006 10:21 PM
      Subject: Re: [NSRCA-discussion] Genesis dihedral


      Verne,

      I have 2 kits, one already built as an electric that I flew all year.   I don't know what the degrees are without setting the unbuilt kit wings up on the work bench,  but my airplane needs more dihedral that specified as it has adverse roll with rudder on both sides -- about 3-4%.  Not a problem per se with mixing however.

      Ron Barr

        ----- Original Message ----- 
        From: Verne Koester 
        To: patternrules at earthlink.net ; NSRCA Mailing List 
        Sent: Sunday, November 12, 2006 9:02 PM
        Subject: Re: [NSRCA-discussion] Genesis dihedral


        Hi Steve,
        I read Steve's write-up but he never said what the dihedral is. Pete's plane is stored at Andrew's so I'll probably go over there and check that one. Might take a flight or two while I'm at it to see if I like it... :)

        Verne
          ----- Original Message ----- 
          From: Steven Maxwell 
          To: NSRCA Mailing List 
          Sent: Sunday, November 12, 2006 9:54 PM
          Subject: Re: [NSRCA-discussion] Genesis dihedral


          Verne, Steve Kessler done a build on RCU  think it's in the electric pattern.

          Steven Maxwell


            ----- Original Message ----- 
            From: Verne Koester 
            To: NSRCA
            Sent: 11/12/2006 8:34:04 PM 
            Subject: [NSRCA-discussion] Genesis dihedral


            Anybody know what the dihedral is supposed to be on a Genesis? It's not cut into the cores and the instructions don't say.

            Thanks,
            Verne


----------------------------------------------------------------------


          _______________________________________________
          NSRCA-discussion mailing list
          NSRCA-discussion at lists.nsrca.org
          http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------


        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061113/bd2e81b0/attachment.html 


More information about the NSRCA-discussion mailing list