[NSRCA-discussion] Genesis dihedral

[Ron Barr]

Verne,

I have 2 kits, one already built as an electric that I flew all year.   I don't know what the degrees are without setting the unbuilt kit wings up on the work bench,  but my airplane needs more dihedral that specified as it has adverse roll with rudder on both sides -- about 3-4%.  Not a problem per se with mixing however.

Ron Barr

  ----- Original Message ----- 
  From: Verne Koester 
  To: patternrules at earthlink.net ; NSRCA Mailing List 
  Sent: Sunday, November 12, 2006 9:02 PM
  Subject: Re: [NSRCA-discussion] Genesis dihedral


  Hi Steve,
  I read Steve's write-up but he never said what the dihedral is. Pete's plane is stored at Andrew's so I'll probably go over there and check that one. Might take a flight or two while I'm at it to see if I like it... :)

  Verne
    ----- Original Message ----- 
    From: Steven Maxwell 
    To: NSRCA Mailing List 
    Sent: Sunday, November 12, 2006 9:54 PM
    Subject: Re: [NSRCA-discussion] Genesis dihedral


    Verne, Steve Kessler done a build on RCU  think it's in the electric pattern.

    Steven Maxwell


      ----- Original Message ----- 
      From: Verne Koester 
      To: NSRCA
      Sent: 11/12/2006 8:34:04 PM 
      Subject: [NSRCA-discussion] Genesis dihedral


      Anybody know what the dihedral is supposed to be on a Genesis? It's not cut into the cores and the instructions don't say.

      Thanks,
      Verne


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061113/9359f819/attachment.html