[NSRCA-discussion] Tech-Aero Designs open for business!

Lance Van Nostrand patterndude at comcast.net
Wed Nov 8 14:22:05 AKST 2006


Ed,
I understand.  Maybe to keep the weight low all you need is a small connector and those that need this LED for that one configuration where battery B is the backup will be the customers that buy the LED accessory.
--Lance

  ----- Original Message ----- 
  From: Ed Alt 
  To: NSRCA Mailing List 
  Sent: Wednesday, November 08, 2006 10:16 AM
  Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


  Hi Lance:
  There are other products coming that will have capabilities like that, only much more. This is really designed for Pattern type apps, to keep the weight way down.  BTW, it's easy to run two or more FlexRegs off just one switch.  I can offer that packaging option to save cost and eliminate another hole in the side of the cabin.  For the Electric power guys, it can also be used without any switch at all.  That's what Dave Lockhart and some others are doing.  His configuration winds up being only 0.8 oz for two FlexRegs, plus the weight of the two batteries.  I think he's using a pair of TP 2C 480 mAh packs.  I use pairs of TP 2C 730s.  Very light.

  Thanks again for your suggestions.

  Ed
    ----- Original Message ----- 
    From: Lance Van Nostrand 
    To: NSRCA Mailing List 
    Sent: Wednesday, November 08, 2006 9:11 AM
    Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


    Ed,
    Thanks.  Here's a suggestion for the future.  Put an LED onthe reg that lights when the power is flowing.  You can put an RC on the front end so it won't light unless current flows for more than 1 sec or so.  This way you can know if the backup battery is kicked in.

    --Lance

      ----- Original Message ----- 
      From: Ed Alt 
      To: NSRCA Mailing List ; dist1 at nsrca.org ; discussion at seniorpattern.com 
      Sent: Tuesday, November 07, 2006 4:50 PM
      Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


      Sorry for the extra email - please go to www.tech-aero.net and for the update

      Thanks
      Ed
        ----- Original Message ----- 
        From: Ed Alt 
        To: NSRCA Mailing List ; dist1 at nsrca.org ; discussion at seniorpattern.com 
        Sent: Tuesday, November 07, 2006 5:49 PM
        Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


        A Tech-Tips page has been added, with Tech-Tip # 0106 - Redundant Power Configurations in PDF format.  Thanks to Lance for the suggestion.  I had also received some private inquiries along the same lines.  We'll be adding more tips soon.

        Thanks!
        Ed

          ----- Original Message ----- 
          From: Lance Van Nostrand 
          To: NSRCA Mailing List 
          Sent: Sunday, November 05, 2006 10:49 PM
          Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


          Congratulations, Ed,

          Welcome to the world of hobbyist gone wacko by starting a business.  Like the "redneck" jokes:
          You may be an AeroSlave if - you start a pattern business based on your hobby time interests.

          Here's a tech question for you.  Can you provide a schematic for how one uses this new product properly for battery backup, etc.?  I published an article in the KF last year on how to wire two packs for redundancy and it did require a regulator on one pack.  Is this similar or do you have a better/different setup.  It's hard to evaluate the advantages of your product without seeing the applications diagrammed out.

          --lance

            ----- Original Message ----- 
            From: Ed Alt 
            To: discussion at seniorpattern.com ; nsrca-discussion at lists.nsrca.org ; dist1 at nsrca.org 
            Sent: Saturday, November 04, 2006 11:20 PM
            Subject: [NSRCA-discussion] Tech-Aero Designs open for business!


            I'm pleased to announce that Tech-Aero Designs is now open for business. The initial product offerings are based on the Failsafe Programmable Regulator design that I originally designed to resolve a product feature gap that both Dave Lockhart and I were struggling with about this time last year.  We both wanted a very precise, small, light weight, ultra reliable regulator system that would work equally well with any battery technology.  Besides being able to function with ordinary single battery systems, it also had to be more precisely settable than any other unit available, in order to be an effective, balanced solution for redundant battery configurations.

            Between Dave, myself and a few other local Pattern flyers, we've accumulated a full season worth of flawless flying with the pre-production units.  Now the Tech-Aero FlexReg is available in production.  Please visit us at:

            http://www.tech-aero.net/

            Thanks!
            Ed Alt




--------------------------------------------------------------------


            _______________________________________________
            NSRCA-discussion mailing list
            NSRCA-discussion at lists.nsrca.org
            http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------


          _______________________________________________
          NSRCA-discussion mailing list
          NSRCA-discussion at lists.nsrca.org
          http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061108/3e8133fa/attachment-0001.html 


More information about the NSRCA-discussion mailing list