[NSRCA-discussion] Tech-Aero Designs open for business!

[Lance Van Nostrand]

Ed,
Thanks.  Here's a suggestion for the future.  Put an LED onthe reg that lights when the power is flowing.  You can put an RC on the front end so it won't light unless current flows for more than 1 sec or so.  This way you can know if the backup battery is kicked in.

--Lance

  ----- Original Message ----- 
  From: Ed Alt 
  To: NSRCA Mailing List ; dist1 at nsrca.org ; discussion at seniorpattern.com 
  Sent: Tuesday, November 07, 2006 4:50 PM
  Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


  Sorry for the extra email - please go to www.tech-aero.net and for the update

  Thanks
  Ed
    ----- Original Message ----- 
    From: Ed Alt 
    To: NSRCA Mailing List ; dist1 at nsrca.org ; discussion at seniorpattern.com 
    Sent: Tuesday, November 07, 2006 5:49 PM
    Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


    A Tech-Tips page has been added, with Tech-Tip # 0106 - Redundant Power Configurations in PDF format.  Thanks to Lance for the suggestion.  I had also received some private inquiries along the same lines.  We'll be adding more tips soon.

    Thanks!
    Ed

      ----- Original Message ----- 
      From: Lance Van Nostrand 
      To: NSRCA Mailing List 
      Sent: Sunday, November 05, 2006 10:49 PM
      Subject: Re: [NSRCA-discussion] Tech-Aero Designs open for business!


      Congratulations, Ed,

      Welcome to the world of hobbyist gone wacko by starting a business.  Like the "redneck" jokes:
      You may be an AeroSlave if - you start a pattern business based on your hobby time interests.

      Here's a tech question for you.  Can you provide a schematic for how one uses this new product properly for battery backup, etc.?  I published an article in the KF last year on how to wire two packs for redundancy and it did require a regulator on one pack.  Is this similar or do you have a better/different setup.  It's hard to evaluate the advantages of your product without seeing the applications diagrammed out.

      --lance

        ----- Original Message ----- 
        From: Ed Alt 
        To: discussion at seniorpattern.com ; nsrca-discussion at lists.nsrca.org ; dist1 at nsrca.org 
        Sent: Saturday, November 04, 2006 11:20 PM
        Subject: [NSRCA-discussion] Tech-Aero Designs open for business!


        I'm pleased to announce that Tech-Aero Designs is now open for business. The initial product offerings are based on the Failsafe Programmable Regulator design that I originally designed to resolve a product feature gap that both Dave Lockhart and I were struggling with about this time last year.  We both wanted a very precise, small, light weight, ultra reliable regulator system that would work equally well with any battery technology.  Besides being able to function with ordinary single battery systems, it also had to be more precisely settable than any other unit available, in order to be an effective, balanced solution for redundant battery configurations.

        Between Dave, myself and a few other local Pattern flyers, we've accumulated a full season worth of flawless flying with the pre-production units.  Now the Tech-Aero FlexReg is available in production.  Please visit us at:

        http://www.tech-aero.net/

        Thanks!
        Ed Alt




------------------------------------------------------------------------


        _______________________________________________
        NSRCA-discussion mailing list
        NSRCA-discussion at lists.nsrca.org
        http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20061108/e5c1b6a3/attachment-0001.html