[NSRCA-discussion] Neu gearbox

[Stuart Chale]

Larry, where did you get the batteries? I can't find them with a Google
search.

Anyone else have any experience with these?  Weights? Price?

Thanks
Stuart

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Larry
Sent: Wednesday, May 17, 2006 11:05 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Neu gearbox

Steve, That's what I'm running in my Quest 90.

1515 2Y w/6.7 Neu box, APC 21x14, 10S1P 5000 cells from Enerland (same as 
the new cells from PollyQuest, Tanic). 2280 + watts static. That was on a 
cool day at 95% charge. It will be higher on a warm day.

Lots of details and pics in a thread I did on RC Groups

http://www.rcgroups.com/forums/showthread.php?t=512023&pp=15

I am very impressed so far. I only have about 8 flights to date, but it 
certainly has more than enough power for my Quest. Full power take off is 
about a 10 foot roll followed by a straight up acceleration that is awesome.

On low passes it sounds kind of like a turbine. Not bad at all.

The motor comes down barely warm, but that's mostly because I do 90% of any 
flight under 1/4 throttle. It will hover at under 1/3 throttle and climbs 
briskly at 1/2 throttle.

My last three flights were just about 8 -10 minutes each of mixed aerobatics

with a few short insane verticals thrown in and a couple of short hover 
attempts and I put back less than 2500 mahr into the packs each time.

I got the motor, gearbox and motor mount from E-Flightline. They have been 
running that motor/gear box for a while in several large planes. They are 
good people to deal with. Talk to Jeff (splash).

http://www.e-flightline.com/

Larry

----- Original Message ----- 
From: "Adam Glatt" <adam.g at sasktel.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, May 17, 2006 7:38 PM
Subject: [NSRCA-discussion] Neu gearbox


> Anyone have experience running the Neu 1515 motor with the Neu 6.7
> gearbox?  I'm interested in your experience with that gearbox.
>
> -Adam
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion