[NSRCA-discussion] Fw: Neu gearbox

[Larry]

Don't know how I did that - this one didn't go to the list either.

Larry

----- Original Message ----- 
From: "Larry" <ledunn at centurytel.net>
To: "Adam Glatt" <adam.g at sasktel.net>
Sent: Wednesday, May 17, 2006 10:54 PM
Subject: Re: [NSRCA-discussion] Neu gearbox


> The motor is the 1515 2Y, but it has a heavy duty box on it. I'm not 100% 
> sure but I think its the same box that comes on the BAM. It has an 8MM 
> shaft instead of the 6mm IIRC.
>
> Larry <Ray :) >
>
> ----- Original Message ----- 
> From: "Adam Glatt" <adam.g at sasktel.net>
> To: <ledunn at centurytel.net>
> Sent: Wednesday, May 17, 2006 8:40 PM
> Subject: Re: [NSRCA-discussion] Neu gearbox
>
>
>> Another question.  Your motor looks different than the 1515w/6.7 shown 
>> here:
>> http://brantuas.com/images/1509_2.5D_boxsm.JPG
>> What am I seeing?
>> -Adam
>>
>> Larry wrote:
>>> Steve, That's what I'm running in my Quest 90.
>>>
>>> 1515 2Y w/6.7 Neu box, APC 21x14, 10S1P 5000 cells from Enerland (same 
>>> as the new cells from PollyQuest, Tanic). 2280 + watts static. That was 
>>> on a cool day at 95% charge. It will be higher on a warm day.
>>>
>>> Lots of details and pics in a thread I did on RC Groups
>>>
>>> http://www.rcgroups.com/forums/showthread.php?t=512023&pp=15
>>>
>>> I am very impressed so far. I only have about 8 flights to date, but it 
>>> certainly has more than enough power for my Quest. Full power take off 
>>> is about a 10 foot roll followed by a straight up acceleration that is 
>>> awesome. On low passes it sounds kind of like a turbine. Not bad at all.
>>>
>>> The motor comes down barely warm, but that's mostly because I do 90% of 
>>> any flight under 1/4 throttle. It will hover at under 1/3 throttle and 
>>> climbs briskly at 1/2 throttle.
>>>
>>> My last three flights were just about 8 -10 minutes each of mixed 
>>> aerobatics with a few short insane verticals thrown in and a couple of 
>>> short hover attempts and I put back less than 2500 mahr into the packs 
>>> each time.
>>>
>>> I got the motor, gearbox and motor mount from E-Flightline. They have 
>>> been running that motor/gear box for a while in several large planes. 
>>> They are good people to deal with. Talk to Jeff (splash).
>>>
>>> http://www.e-flightline.com/
>>>
>>> Larry
>>>
>>> ----- Original Message ----- 
>>> From: "Adam Glatt" <adam.g at sasktel.net>
>>> To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>>> Sent: Wednesday, May 17, 2006 7:38 PM
>>> Subject: [NSRCA-discussion] Neu gearbox
>>>
>>>
>>>
>>>> Anyone have experience running the Neu 1515 motor with the Neu 6.7
>>>> gearbox?  I'm interested in your experience with that gearbox.
>>>>
>>>> -Adam
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>
>