[NSRCA-discussion] Brio 10

[Bob Richards]

Michael,
   
  That was my thought as well. The Hyperion motor I am using pulls 30 amps with a 10x5E, and about 35 amps with a 11x5.5E.  The 10x5 is adequate for pattern work.
   
  Bob R.
  

Michael Laggis <fishgod at pobox.mtaonline.net> wrote:
  What it sounds like to me is the Phoenix 25's are being used outside of
spec. Following threads on RCGroups most of these setups for the brio are
pulling in the high 20's to high 30 amp range. I believe most would be
better off with a 35 or 40 amp speed controller.

Michael 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060517/66b1b797/attachment.html