[NSRCA-discussion] Fw: High Speed, Coreless Servo

Atwood, Mark atwoodm at paragon-inc.com
Fri May 12 09:21:11 AKDT 2006


129Kg??  You're gonna need a bigger servo....

 

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob
Pastorello
Sent: Friday, May 12, 2006 1:11 PM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] Fw: High Speed, Coreless Servo

 

From: Bob Pastorello <mailto:rcaerobob at cox.net>  

To: vicenterc at comcast.net 

Sent: Friday, May 12, 2006 11:46 AM

Subject: Re: [NSRCA-discussion] High Speed, Coreless Servo

 

129.728 kg


Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net

	----- Original Message ----- 

	From: vicenterc at comcast.net 

	To: NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>
; NSRCA Mailing List <mailto:nsrca-discussion at lists.nsrca.org>  

	Cc: Bob Pastorello <mailto:rcaerobob at cox.net>  

	Sent: Friday, May 12, 2006 11:29 AM

	Subject: Re: [NSRCA-discussion] High Speed, Coreless Servo

	 

	Hi Bob,

	 

	What is your final weight using gas motor?

	 

	Regards,

	 

	Vicente 

	 

		-------------- Original message -------------- 
		From: "Bob Pastorello" <rcaerobob at cox.net> 

		Yup.

		Gas motor.

		
		Bob Pastorello
		www.rcaerobats.net
		rcaerobob at cox.net

			----- Original Message ----- 

			From: Dave Burton <mailto:burtona at bellsouth.net>


			To: NSRCA Mailing List
<mailto:nsrca-discussion at lists.nsrca.org>  

			Sent: Friday, May 12, 2006 10:34 AM

			Subject: Re: [NSRCA-discussion] High Speed,
Coreless Servo

			 

			What's the reason for the speed need? Can you
really tell the difference on throttle?

				-----Original Message-----
				From:
nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Bob
Pastorello
				Sent: Friday, May 12, 2006 11:13 AM
				To: NSRCA Mailing List
				Subject: Re: [NSRCA-discussion] High
Speed, Coreless Servo

				Nope.  4131 rated at .23

				Looking for .10 +/-

				 

				Thanks

				
				Bob Pastorello
				www.rcaerobats.net
<http://www.rcaerobats.net/> 
				rcaerobob at cox.net

				----- Original Message ----- 

				From: Dave Burton
<mailto:burtona at bellsouth.net>  

				To: NSRCA Mailing List
<mailto:nsrca-discussion at lists.nsrca.org>  

				Sent: Friday, May 12, 2006 9:48 AM

				Subject: Re: [NSRCA-discussion] High
Speed, Coreless Servo

				 

				JR 4131

				-----Original Message-----
				From:
nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Bob
Pastorello
				Sent: Friday, May 12, 2006 10:31 AM
				To: NSRCA Mailing List
				Subject: [NSRCA-discussion] High Speed,
Coreless Servo

				I'm in need of ideas for standard-size
HIGH SPEED coreless throttle servos, nylon gears....NON Digital...

				No brand preferences, just need some
suggestions??

				 

				Thanks!

				
				Bob Pastorello
				www.rcaerobats.net
<http://www.rcaerobats.net/> 
				rcaerobob at cox.net

				
________________________________


	
_______________________________________________
				NSRCA-discussion mailing list
				NSRCA-discussion at lists.nsrca.org
	
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

			
________________________________


			_______________________________________________
			NSRCA-discussion mailing list
			NSRCA-discussion at lists.nsrca.org
	
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060512/b342ae4b/attachment-0001.html 


More information about the NSRCA-discussion mailing list