[NSRCA-discussion] High Speed, Coreless Servo

[Dave Burton]

What's the reason for the speed need? Can you really tell the difference on
throttle?
  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Bob Pastorello
  Sent: Friday, May 12, 2006 11:13 AM
  To: NSRCA Mailing List
  Subject: Re: [NSRCA-discussion] High Speed, Coreless Servo


  Nope.  4131 rated at .23
  Looking for .10 +/-

  Thanks

  Bob Pastorello
  www.rcaerobats.net
  rcaerobob at cox.net
    ----- Original Message -----
    From: Dave Burton
    To: NSRCA Mailing List
    Sent: Friday, May 12, 2006 9:48 AM
    Subject: Re: [NSRCA-discussion] High Speed, Coreless Servo


    JR 4131
      -----Original Message-----
      From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Bob Pastorello
      Sent: Friday, May 12, 2006 10:31 AM
      To: NSRCA Mailing List
      Subject: [NSRCA-discussion] High Speed, Coreless Servo


      I'm in need of ideas for standard-size HIGH SPEED coreless throttle
servos, nylon gears....NON Digital...
      No brand preferences, just need some suggestions??

      Thanks!

      Bob Pastorello
      www.rcaerobats.net
      rcaerobob at cox.net


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060512/f7c90c80/attachment.html