[NSRCA-discussion] High Speed, Coreless Servo

[DaveL322 at comcast.net]

Bob,

I've not used one - but -
JR810G - 0.10 sec, 34 oz/in, std size

JR4735 - 0.15 sec, 90 oz/in, std size
I used that servo a bunch back in the day.

Regards,
Dave Lockhart, Team JR
DaveL322 at comcast.net


-------------- Original message -------------- 
From: "Bob Pastorello" <rcaerobob at cox.net> 

I'm in need of ideas for standard-size HIGH SPEED coreless throttle servos, nylon gears....NON Digital...
No brand preferences, just need some suggestions??

Thanks!

Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060512/765058b4/attachment.html 
-------------- next part --------------
An embedded message was scrubbed...
From: "Bob Pastorello" <rcaerobob at cox.net>
Subject: [NSRCA-discussion] High Speed, Coreless Servo
Date: Fri, 12 May 2006 14:32:20 +0000
Size: 713
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060512/765058b4/attachment.mht