[NSRCA-discussion] Brio 10-Again

[Ken Thompson]

I think I'll get some graphics cut for mine:-)
  ----- Original Message ----- 
  From: Rcmaster199 at aol.com 
  To: patternrules at earthlink.net ; nsrca-discussion at lists.nsrca.org 
  Sent: Tuesday, May 02, 2006 11:40 PM
  Subject: Re: [NSRCA-discussion] Brio 10-Again


  How's THIS for a name for the little Brio?

  I call it the EMBRIO. 

  E for electric, M for mini (that was Steve's imput), Brio.

  Howzat?

  MattK

  In a message dated 4/27/2006 12:29:22 AM Eastern Standard Time, patternrules at earthlink.net writes:
    I've got 6 flights on mine 10-20 MPH winds and it's very solid, waiting to get some real trimming done in less wind. Set-up as follows.
    Hacker A30-16m
    CC P-35
    Tp 2100 3 cell
    4-S75
    Apc 11x7 e amps 34.7 380 watts
    APC 10X7 e 30.5 Amps needed more throttle by quite a bit 330 watts
    APc 12X6 36.5 amps didn't fly yet
    AUW 31.7
    Made new standouts for motor from carbon hollow rod just big enough for 4-40 saved about 8 Grams added hatch latch. Didn't like the black velcro strap replaced with better velcro. After the 6th flight started charging at 3C with TP 1010 and 210 balancer. 23 minute for 1687 MAH full charge.


    Steven Maxwell


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060503/0aa015f3/attachment-0001.html