[NSRCA-discussion] Futaba 9202 Servos

[Jay Marshall]

I had the same problem. The buzz is partially caused by the servo trying to
constantly make a slight correction. Not a big deal to worry about but can
be helped by freeing up the hinges and controls, and by using ball joint
control arms.
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jerry Wilson
Sent: Tuesday, March 28, 2006 10:14 PM
To: 'NSRCA Mailing List'
Subject: [NSRCA-discussion] Futaba 9202 Servos
 
I have some 9202 servos on elevator and rudder that buzz and creak.
 
Otherwise they seem to work OK.  But I'm nervous about continued use.
 
Can these servos be rebuilt?
 
I would be willing to try myself if I new which parts to order or I would
send them off for repair.
 
Any advice would be appreciated.
 
Thanks,
Jerry
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060329/9bb2813c/attachment.html