[NSRCA-discussion] Looking for a Proline Tx with Chidgey sticks

[Ed Alt]

Thanks, I took a look and as Gordon also replied, these don't have the kind 
of stick assemblies I'm looking for.  Otherwise, a good find for a 
conversion project though.  I think I will keep searching though.  Thanks 
for forwarding it.

Ed
----- Original Message ----- 
From: "dwaynenancy" <dwaynenancy at cox.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, March 14, 2006 9:34 AM
Subject: Re: [NSRCA-discussion] Looking for a Proline Tx with Chidgey sticks


> Ed, are you interested in this one?  Dwayne
>
> http://cgi.ebay.com/Two-Vintage-Proline-Radio-Control-R-C-Transmitters_W0QQitemZ6042431206QQcategoryZ34056QQrdZ1QQcmdZViewItem
>
> Gordon Anderson wrote:
>
>> Ed,
>>
>> Thanks for the interest in my Encoder. The Proline transmitters are
>> getting hard to find, the last one I picked up was at Northwest Model
>> Expo. I'm sure you are aware of my web site, www.mstar2k.com
>> <http://www.mstar2k.com>, you can find all the technical data on this
>> site. I'm happy to help you with this project. Electronics is my
>> second hobby and my projects open to the public through my web site. I
>> would estimate about 50 to 70 systems have been built to date. This is
>> the only "open source" design available.
>> I will be designing a next generation encoder using the PIC18F8722.
>> This encoder will be smaller but it will be next fall before it is
>> complete. This version will have digital or analog trim options as
>> well as other upgrades. Again, thanks for your interest and good luck
>> with your project.
>>
>> --Gordon
>>
>> BTW; I'm a licensed Radio Amateur (KG7YU) and all my home built
>> electronics are on the HAM bands.
>> ------------------------------------------------------------------------
>> *From:* nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *Ed Alt
>> *Sent:* Monday, March 13, 2006 7:30 PM
>> *To:* nsrca-discussion at lists.nsrca.org
>> *Subject:* [NSRCA-discussion] Looking for a Proline Tx with Chidgey 
>> sticks
>>
>> I'm looking to buy a ProLine 2 stick transmitter for an update project
>> I'm doing.  I'm building a Gordon Anderson Microstar 2000 encoder and
>> was originally going to fit it into a Kraft Tx, but the fit is fairly
>> tight and the open Gimbal Kraft sticks just aren't as good as the
>> Chidgey sticks were.  The ProLine was taller and everything ought to
>> fit better.  I can make the Kraft conversion work, but the ProLine
>> approach is much more appealing.  Anyone know of a source for one?
>> Tired of trolling eBay...
>>
>> Thanks
>>
>> Ed
>>
>>
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>NSRCA-discussion mailing list
>>NSRCA-discussion at lists.nsrca.org
>>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>------------------------------------------------------------------------
>>
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.375 / Virus Database: 268.2.1/279 - Release Date: 3/10/2006
>>
>>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>