[NSRCA-discussion] OS-160 FI bearings

[Grow Pattern]

Jason,
             The stainless steel bearings that I use in my 1.60's are by 
SMT. Their stock code is 6004-2ZWM040. Available from local bearing 
suppliers.

Regards,

Eric.

P.S. The FI bearings are the same as the FX bearings. shielded, not sealed 
and open on one side.



----- Original Message ----- 
From: "Mike Hester" <kerlock at comcast.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Monday, March 06, 2006 6:03 PM
Subject: Re: [NSRCA-discussion] OS-160 FI bearings


> Same bearings. Not different like the 140 unfortunately. I'd get a 
> stainless
> aftermarket from Boca or wherever.
>
> -Mike
>
> ----- Original Message ----- 
> From: "JShulman" <jshulman at cfl.rr.com>
> To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
> Sent: Monday, March 06, 2006 4:36 PM
> Subject: [NSRCA-discussion] OS-160 FI bearings
>
>
>> Anyone have the #'s for these? Not sure if they are any different than 
>> the
>> stock 160 bearings... can't believe they are.
>>
>> Regards,
>> Jason
>> www.jasonshulman.com
>> www.shulmanaviation.com
>> www.composite-arf.com
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>