[NSRCA-discussion] Hacker C50 Comp Question

[MKMSG]

Verne:  Thanks!  I would have never guessed that was the cause, but moving the wires cured the problem.

Mike
  ----- Original Message ----- 
  From: Verne Koester 
  To: NSRCA Mailing List 
  Sent: Sunday, June 25, 2006 12:14 AM
  Subject: Re: [NSRCA-discussion] Hacker C50 Comp Question


  Yep, same motor, same plane. Try bending the wires toward the outside of the case.

  Verne Koester
    ----- Original Message ----- 
    From: MKMSG 
    To: NSRCA Mailing List 
    Sent: Sunday, June 25, 2006 1:07 AM
    Subject: [NSRCA-discussion] Hacker C50 Comp Question


    I've had a C50 Competition motor for quite a few months but just this evening removed it from the box to install in a new PL Partner.  I was surprised to find how much harder it was to turn the outshaft compared to my standard C50 motors.  In addition, the C50 Comp "cogs" when the output shaft is turned while my standard C50 motors are very smooth.  Has anyone else with the C50 14XL Comp experienced the same thing?

    Mike Moritko


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060625/4d1e193e/attachment.html