[NSRCA-discussion] Sheeting

[Jay Marshall]

A very informative article. Thanks Clay.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Clay Schmidt
Sent: Sunday, June 04, 2006 8:43 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Sheeting

Jay,

Here is an article describing the process.

http://www.egpworld.com/ultrahobby/teamuhp/FMFINISHINGARTICLE.htm



Clay


----- Original Message ----- 
From: "Jay Marshall" <lightfoot at sc.rr.com>
To: "NSRCA" <NSRCA-discussion at lists.nsrca.org>
Sent: Sunday, June 04, 2006 7:16 AM
Subject: [NSRCA-discussion] Sheeting


>I have heard that using Minwax(r) Polycrylic(r) instead of epoxy when
> sheeting a wing/fuse is better than finishing epoxy over the fiberglass. 
> No
> odor, dries fast, less cost, water cleanup. Add a little talc and it sands
> very well. Has anyone tried this?
>
> Jay Marshall
>
>


----------------------------------------------------------------------------
----


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion