[NSRCA-discussion] Futaba TX springs

[Stuart Chale]

Reply from Tony Stillman regarding the heavy duty springs that they sell
from Radio South, and if an intermediate spring is available.

"No, that is a custom spring that we make.  The 9C does not have other
springs.  Some have used the old 9V springs."

Stuart

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Michael
Wickizer
Sent: Thursday, June 01, 2006 10:58 AM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Futaba TX springs

We went through this last year with a 9Z.  The heavy duty springs for the 9Z

and maybe the 14 are very stiff.  We found that the heavy duty springs for 
the 9C to be a good comprimise.  We originally were not aware that the heavy

duty springs were different for different radios, although they all look 
alike, and were all a pain to install.  We got all the springs from Radio 
South.


>From: Stuart Chale <schale at optonline.net>
>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
>Subject: Re: [NSRCA-discussion] Futaba TX springs
>Date: Thu, 01 Jun 2006 10:46:06 -0400
>
>Does anyone have a source for some in between the originals and what radio
>south sells.  I find the originals too soft for my taste but I just bought
>some from Radio South and installed them in the 14 MZ and found them to be
>too stiff :)  They were also a pain to install as one of the ends need to 
>be
>bent 90 degrees to fit right.
>
>Stuart
>
>-----Original Message-----
>From: nsrca-discussion-bounces at lists.nsrca.org
>[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
>jonlowe at aol.com
>Sent: Thursday, June 01, 2006 10:05 AM
>To: nsrca-discussion at lists.nsrca.org
>Subject: Re: [NSRCA-discussion] Futaba TX springs
>
>Radio South sells them.
>
>-----Original Message-----
>From: Tim <twortkoetter at yahoo.com>
>To: 'NSRCA LIST' <nsrca-discussion at lists.nsrca.org>
>Sent: Thu, 1 Jun 2006 08:48:32 -0500
>Subject: [NSRCA-discussion] Futaba TX springs
>
>I want to by the heavy duty transmitter spring but am having a hard
>time getting some.  If anyone has a set the want to sell or know where
>I can get a set for a 9C let me know.
>
>
>
> 
>
>
>
>Tim Wortkoetter
>
>
>
>
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion