[NSRCA-discussion] Futaba TX springs

[Jay Marshall]

Have you tried heating them to make them weaker?

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Stuart Chale
Sent: Thursday, June 01, 2006 10:46 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Futaba TX springs

Does anyone have a source for some in between the originals and what radio
south sells.  I find the originals too soft for my taste but I just bought
some from Radio South and installed them in the 14 MZ and found them to be
too stiff :)  They were also a pain to install as one of the ends need to be
bent 90 degrees to fit right.

Stuart

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
jonlowe at aol.com
Sent: Thursday, June 01, 2006 10:05 AM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Futaba TX springs

Radio South sells them.

-----Original Message-----
From: Tim <twortkoetter at yahoo.com>
To: 'NSRCA LIST' <nsrca-discussion at lists.nsrca.org>
Sent: Thu, 1 Jun 2006 08:48:32 -0500
Subject: [NSRCA-discussion] Futaba TX springs

I want to by the heavy duty transmitter spring but am having a hard 
time getting some.  If anyone has a set the want to sell or know where 
I can get a set for a 9C let me know.



 



Tim Wortkoetter





_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion