[NSRCA-discussion] paint

[Jay Marshall]

Get Don Ramsey's "Painting a Wing - the Right Way" DVD.
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tim
Sent: Wednesday, July 12, 2006 11:39 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] paint
 
I am getting ready to spray imron.  I have never painted anything.  I told
the paint shop what I was using it for and they said I didn't need a clear
and I didn't get any reducer.  What type of reducer and how much should I
use for this type of paint.  Also why do you use clear over a single stage
paint.  
 
Tim
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gray E Fowler
Sent: Wednesday, July 12, 2006 8:17 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] paint
 

Robert 

Humidity is not a problem, dew point is. Since it is warm now in most places
this should not be a problem.  The amount of reducer called out by the paint
manufacturer has two purposes, 

1. Reduce the viscosity so a standard paint gun can atomize 
2. Only reduce the viscosity barely enough as to meet EPA volatile organic
emmision requirements 

The PPG "reducer" amounts allow the car painting guy to seriously "lay it
on" with out fear of runs or overspray. Unfortunately laying it on an
airplane increases weight. A thicker clear coat will not really protect your
plane better than a thinner coat, so it is just weight. Adding more reducer
(its really a blend of different solvents)  will allow for thinner coats,
less overspray, but can increase runs. 

The reducer like I mentioned is a blend of solvents, and all of this 100%
evaporates and has nothing to do with the urethane chemical reaction that
cures the clearcoat. You can add as much reducer as you want without
reprisal...except from the EPA, which I doubt will go after an individual
pattern guy...but I could be wrong.  So once you are comfortable with
increasing your local pollution level...add that 200% reducer!!! 



Gray Fowler
Senior Principal Chemical Engineer
Radome and Composites Engineering
Raytheon 



"Robert Mairs" <robertm at sssnet.com> 
Sent by: nsrca-discussion-bounces at lists.nsrca.org 
07/12/2006 05:42 AM 

Please respond to
NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>

To
"NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org> 

cc
 

Subject
[NSRCA-discussion] paint
 

 
 



Couple of painting questions.

Weathers turned to crap around here again.  How much humidity is to humid to

paint?

I've been reading where the jet guys are reducing they're clear coat to a 
200% ratio.  They think it's great.  Anybody tried this? 


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060712/354c5cec/attachment.html