[NSRCA-discussion] Analog Servo RF Masking and....Thanks!

[Scott Pavlock]

William

I have to put in all this time the Nats are less than two weeks away and
this is my only plane  I need to make it work.

Scott

On 7/4/06, William C. Harden <flyinbill1 at bellsouth.net> wrote:
>
>  Ed,
>
>
>
> I think you should send the receiver and all the digital servos to Futaba
> and have them fix the problem.  You sure are putting a lot of time into
> resolving the issue and can't seem to get anywhere.  Futaba should fix or
> replace the faulty component(s).
>
>
>
> My thoughts anyway.  I'm sorry you have to deal with this problem.
>
>
>
> Bill Harden
>
>
>  ------------------------------
>
> *From:* nsrca-discussion-bounces at lists.nsrca.org [mailto:
> nsrca-discussion-bounces at lists.nsrca.org] *On Behalf Of *John Pavlick
> *Sent:* Tuesday, July 04, 2006 7:39 PM
>
> *To:* NSRCA Mailing List
> *Subject:* Re: [NSRCA-discussion] Analog Servo RF Masking and....Thanks!
>
>
>
> Ed,
>
> See, you need a 'scope <VBG>. Sounds like he's tried just about
> everything. Only common thing is the servos I guess. Sounds odd because I'm
> sure a lot of people are using those servos without any problems. Long servo
> leads can be a problem as Scott Smith suggested, but he's probably been
> through that too. This is a real interesting problem - well, interesting if
> it isn't happening to you. Can't think of anything else at the moment except
> for trying totally different (Futaba) digital servos.
>
>
>
> John Pavlick
> http://www.idseng.com
>
>
>
>
>  -----Original Message-----
> *From:* nsrca-discussion-bounces at lists.nsrca.org [mailto:
> nsrca-discussion-bounces at lists.nsrca.org]*On Behalf Of *Scott Pavlock
> *Sent:* Tuesday, July 04, 2006 8:07 PM
> *To:* NSRCA Mailing List
> *Subject:* Re: [NSRCA-discussion] Analog Servo RF Masking and....Thanks!
>
> Ed
>
>  WE used three different Rx two different brands all the same glitch also
> put hole setup in my dad trainer same glitch also used my dads brand new RX
> and TX same glitch. Used three different freq. same glitch.So we tried a
> analog servo no glitch we replaced them all with analog no glitch still no
> confidence in the system.
>
> Scott
>
> On 7/4/06, *Scott Pavlock* <f3aflyer7 at gmail.com> wrote:
>
> Scott
>
>  I don't know if Tony put it on a shaker table or not but he did put six
> hours in the system. And he really went out of his way to get it to us
> asap.With the 4th holiday I've not been able to contact him, maybe
> tommorow. While range checking the digis if I put my hand on the antenna the
> glitch increased but with the analog there was no glitch at all. My father
> and I have been working this problem for over a month we have replaced
> everything or sent it in to be checked.Right now no glitches with analogs
> but again will the glitch present itself as noticably with analogs as apose
> to the digis.We have no glitch right now but still no confidence in the
> system.
>
>
> Scott
>
>
>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060705/94547176/attachment.html