[NSRCA-discussion] Good 9411 Replacement

[R. LIPRIE]

Listen I would go with troy's decision about the 9411 servo. 
  ----- Original Message ----- 
  From: Troy A. Newman 
  To: NSRCA Mailing List 
  Sent: Sunday, July 02, 2006 10:30 PM
  Subject: Re: [NSRCA-discussion] Good 9411 Replacement


  JR 9011 is basically the same servo in an analog version.....This servo I don't feel is adequate for ailerons on a 2M plane. I feel with today's powerplants 60in-oz on Ailerons is very marginal....at the least it is a minimum for sure. I don't feel going with the min needed is the best practice.

  http://www.horizonhobby.com/Products/Default.aspx?ProdID=JRPS9011

  Troy


    ----- Original Message ----- 
    From: Scott Pavlock 
    To: NSRCA Discussion List 
    Sent: Sunday, July 02, 2006 4:45 PM
    Subject: [NSRCA-discussion] Good 9411 Replacement


    Does anyone know of a good replacement for a JR 9411 in an analog servo. Mainly I am looking for a servo with the same dimensions, irregardless of its specs.

    Thanks!

    Scott



----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060703/b9f08ef9/attachment.html