[NSRCA-discussion] Trimming question
Ken Thompson
mrandmrst at comcast.net
Mon Jan 30 02:22:07 AKST 2006
Wouldn't negative incidence cause it to push to the gear, not the canopy?
Ken
----- Original Message -----
From: "Lance Van Nostrand" <patterndude at comcast.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Monday, January 30, 2006 12:40 AM
Subject: Re: [NSRCA-discussion] Trimming question
> Not many responses to this one, but here's my thought. The wing incidence
> is way negative and the CG is aft. I got myself into that situation once
> and didn't catch it for a while. Inverted flight was fine but the plane
> was
> squirrely and the up elv trim was more effective in knife edge than level
> flight, resulting in canopy pull.
> --Lance
>
> ----- Original Message -----
> From: "John Pavlick" <jpavlick at idseng.com>
> To: "NSRCA Discussion" <nsrca-discussion at lists.nsrca.org>
> Sent: Friday, January 27, 2006 10:31 PM
> Subject: [NSRCA-discussion] Trimming question
>
>
>> Ok here's a good one. The owner of the L.H.S. asked me what I thought
>> about
>> this and I couldn't come up with a good answer. He has a Hangar 9 Ugly
>> Stik - the real big one. I can't remember exactly what it's called. Guess
>> it
>> has a gas motor in it. It's big. He says he has it trimmed so it will fly
>> inverted with just a very slight bit of down elevator (almost none). Ok,
>> so
>> it's not nose heavy, maybe even a little tail heavy. Now, when he flies
>> it
>> knife edge (either side) it pulls severely to the canopy. I mean like it
>> will fly a complete circle. It needs almost 3/4 down elevator to fly
>> straight. It's beyond a mix - fix. He also says that it has a bit of roll
>> couple when flying level (not knife edge) but it doesn't pitch severely
>> up
>> or down under these conditions. Any thoughts? I guess you can rule out
>> C.G.
>> because if anything it should pull to the belly considering how it's
>> trimmed
>> to fly level upright and inverted. I haven't flown it so I can't add too
>> much more. He builds OK so I don't think there's anything way out of
>> alignment, but again I haven't seen it yet so maybe there is. What should
>> I
>> look for if I get my hands on it to try and help him?
>>
>> John Pavlick
>> http://www.idseng.com
>>
>> --
>> No virus found in this outgoing message.
>> Checked by AVG Free Edition.
>> Version: 7.1.375 / Virus Database: 267.14.23/243 - Release Date: 1/27/06
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list