[NSRCA-discussion] JR Stuff, Where made?

[Mike McConville]

Hi Guy,

I saw this post ands though I'd clear up the situation. I'm sorry that our phone tech gave you misinformation, but that is what happened here.  All high eng JR digital servos are made in Japan, not Malaysia, including the 8231. Even the sport digitals like the 811 are made in Japan. True the 537 is made in Malaysia, but not close to ALL JR servos as you were told.

Hope this clears up th issue.

Mike McConville

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Ed Miller
Sent: Monday, January 09, 2006 2:07 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] JR Stuff, Where made?


Welcome to the world of "how cheap it can be made" syndrome. I bought my 
son's LCD 23" TV's for Xmas, made overseas. Both went back to Wally World 
yesterday as both are defective. Of course Wally World didn't have any to 
replace them, so I got a refund. No matter where I went, nobody had 2 of any 
one model so I had to purchase 1 LCD TV and order the 2nd from Circuit City. 
The new TV's I bought are a different brand than the originals I bought and, 
of course they are made overseas. Anyone that thinks we are getting superior 
products at a better quality in this new world order is sadly mistaken. It's 
all about the $$$, if it's cheaper it must be a better deal.
I'll keep my made in Japan Futaba equipment and continue to buy GM cars and 
Harley motorcycles as long as I can, until this current business mindset 
runs every decent business into the ground.
Those pictures you see on CNN of the "3rd world countries", get used to them 
as they very well could become your children's neighborhoods.
Ed M.
----- Original Message ----- 
From: <Zoro1024 at aol.com>
To: <discussion at nsrca.org>
Sent: Monday, January 09, 2006 2:46 PM
Subject: [NSRCA-discussion] JR Stuff, Where made?


>I just got off the phone with a Tech. at Horizon, I had an issue with some
> 537 digitals, and he told me all JR servos are made at the same factory in
> Malaysia, Yipee cause one of mine quit on the third flight and the one I
> replaced it with would only travel in one direction.  I even asked him if 
> 8231's are
> made at the same facility and he went and asked someone else and came 
> back
> and repeated that they were all being made in the same place.  Bah 
> Humbug!
>
>
>
> Mike H..
>
>
>
>
>


--------------------------------------------------------------------------------


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion