[NSRCA-discussion] Foamy for pattern practice

colin chariandy cchariandy at yahoo.ca
Sun Jan 8 11:38:53 AKST 2006


I finally got the F3A flying today ( no snow, no wind, no rain). With a Kokam 3S 340 pack I am way short of power. I'll try a 3S 500 next. Also, the aft cg limit in the manual (60mm from LE) is still very nose heavy. What's the best cg position for pattern?
   
  Thanks
  Colin.

colin chariandy <cchariandy at yahoo.ca> wrote:
    Thanks to all for the advice. F3A Shock flyer it is!! I've already place the order.
   
  Colin.

John Pavlick <jpavlick at idseng.com> wrote:
          Colin,
   Hobby Lobby has them: http://www.hobby-lobby.com along with AXI motors and everything else you might need. They're in the electric RC airplanes section. You can also check out the Ikarus web-site for more details: http://www.ikarus-modellbau.de/onlineshop/usa/index.php
  Ikarus also makes the Aerofly Pro Deluxe simulator that a lot of us are using. 
    John Pavlick
http://www.idseng.com

   
    -----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of jguinn
Sent: Monday, December 26, 2005 11:33 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Foamy for pattern practice


  Were can you find this web site to buy these planes
    ----- Original Message ----- 
  From: John Pavlick 
  To: NSRCA Discussion 
  Sent: Sunday, December 25, 2005 12:06 AM
  Subject: RE: [NSRCA-discussion] Foamy for pattern practice
  

  Colin,
   Well, I love my Ikarus F3a Shock-Flyer. We as pattern pilots are very picky so you will have to decide for yourself. Mine is set up with an AXI 2204/54, APC 8x3.8 S.F., T.P. 3S 480 LiPO's, Berg 4-channel Rx and 3 Hitec HS-55's. AUW is 6.9 oz. Not super light but OK for indoor/ outdoor work. I haven't flown this in any serious wind yet, but my old 9 oz. Shocky Super-Star held up OK so I'm thinking this won't be too bad. As far as flight characteristics: almost NO roll or pitch coupling. I'd have to say it's pretty close to a full-size pattern plane if you keep in mind it's made out of foam and only weighs 7 oz. You can do precision maneuvers with it - the wings don't flex and the fuselag! e doesn't twist. It grooves nicely and it's not twitchy like some of the "flexible flyers" made for the 3D wannabes. The new Shockies are much stronger than the older ones and easier to build straight. If you already have a motor and some micro radio gear it will only cost you about $50.00 U.S. to
 try one for yourself. I don't think you'll be disappointed.
    John Pavlick
http://www.idseng.com
  

   
   -----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of colin chariandy
Sent: Saturday,! December 24, 2005 7:07 PM
To: discussion at nsrca.org
Subject: [NSRCA-discussion] Foamy for pattern practice


    Hi all
   
  I'm looking for a small (less than 10oz) foamy for pattern practise and fun while there's snow on the ground. What have the guys in group used? I've tried rcu for opinions and found it impossible to get any consensus...there are as many negatives as positives for every aircraft discussed.
   
  I have a GP Turmoil however it flys more like a kite than a precision aircraft. I'm looking for something that has been designed for more than just hovering/3D.
   
  Any help will be appreciated.
   
  Colin
  Ontario, CA.
    
---------------------------------
  Find your next car at Yahoo! ! Canada Autos
    
---------------------------------
    
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  

    
---------------------------------
  Find your next car at Yahoo! Canada Autos_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  


		
---------------------------------
Find your next car at Yahoo! Canada Autos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20060108/3d37b6ae/attachment.html


More information about the NSRCA-discussion mailing list