[NSRCA-discussion] Some Tools

[Bob Pastorello]

Thanks, everyone.  Just wanted to share these two recent tips/tricks, thought they would be helpful to some.  If any of you try the "control drill jig", please let me know what you think and how it works for you.

Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net
  ----- Original Message ----- 
  From: George Kennie 
  To: NSRCA Mailing List 
  Sent: Tuesday, January 03, 2006 12:09 PM
  Subject: Re: [NSRCA-discussion] Some Tools


  Boy, is it good to see you back on the list! 
  Bob Pastorello wrote: 

      Courtesy of Italian friend, Stefano Doni, met on RCU, here are some updates to an old tool on my websitehttp://www.rcaerobats.net/DeflectionGauge.htm Then - my solution to the drilling of those control hardwood dowels so that the holes will be exactly vertical and match on both L and R elevators/ailerons.  It's easy to make, and works quite well.http://www.rcaerobats.net/CG-Yak/ControlDrillGuide.htm 
    Bob Pastorello 
    www.rcaerobats.net 
    rcaerobob at cox.net 

----------------------------------------------------------------------------_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion  


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20060106/14cd795e/attachment.html