[NSRCA-discussion] YS 110 prop and fuel

[Troy A. Newman]

Cool Power 30 Heli

Hatori 725 pipe  726 header (can't use the NMP header because of the air 
box)

APC 15-10

very good combo.  We are flying it on a Oxai 110 sized pattern model. weight 
is 7.75lbs.

I think this motor would be perfect with models up to about 9-9.25lbs.

Troy


----- Original Message ----- 
From: "Michael Laggis" <fishgod at pobox.mtaonline.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, January 03, 2006 10:23 PM
Subject: Re: [NSRCA-discussion] YS 110 prop and fuel


> For 3D I am running 30 percent and an APC 16x6.  Here near sea level I'm 
> getting 9800 Max and flying it at 9600.  The motor in a 8 lb 2oz plane is 
> insane power.
>
> Thanks
> Michael Laggis
> AKA Moose Boy
> NSRCA 3618
> http://www.alaskarc.org
>
>
> ----- Original Message ----- 
> From: "Adam Glatt" <adam.g at sasktel.net>
> To: <discussion at nsrca.org>
> Sent: Tuesday, January 03, 2006 6:41 PM
> Subject: [NSRCA-discussion] YS 110 prop and fuel
>
>
>>I have a local friend who bought a YS FZ-110.  What prop and fuel are 
>>successful in this motor?
>>
>> -Adam
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>>
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>