[NSRCA-discussion] 14 mz

[Koenig, Tom]

Gentlemen,

Is this only specific to the 72 meg receivers?? I have not had any problems at all-you have me spooked a little! What is the actual cause of the lock out problems described??

Tom
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of R LESHER
Sent: Wednesday, 4 January 2006 2:13 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] 14 mz


Arch
At the time, no one new anything about shortening the antenna.  I just ordered another G3, and planned on sending the offending receiver back in.
I figured I'd need more than one G3 receiver anyway, so getting another was no big deal.  I plan on shortening the antenna as specified, but haven't had a chance to do it yet.  I'm going to use an old sport plane, just in case.  It was weird though, only the throttle channel had a problem.  It would lock at high throttle for a couple extra seconds, then start responding like normal.  Kind of spooky having it start doing it right in the middle of a contest round.  I was glad that it was throttle and not something like elevator.  I had it do it a day before, but figured it was something to do with antenna routing or a vibration thing.  Repadded the receiver and shifted the antenna route, and it all went away.  Thought I had it solved...
Thought wrong!

Rex
----- Original Message -----
From: Arch  <mailto:rcpattern at comcast.net> Stafford
To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org> 
Sent: Tuesday, January 03, 2006 6:44 PM
Subject: RE: [NSRCA-discussion] 14 mz

Rex,

Thanks for the information.  I'm anxious to try it and I'll let you know what I find.  Have you tried shortening your receive antenna like Futaba is recommending?  Have you tried the G3 receiver again?

Arch



  _____ 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of R LESHER
Sent: Tuesday, January 03, 2006 8:27 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] 14 mz

Arch
I've done exactly what you are talking about trying.  My G3 receiver was having some lockout issues in throttle, so I just switched it out for my trusty ol 149DP...   It wasn't real pretty!  The model (Hydeaway) was way too responsive.  Something in the transition of switching to 1024 from 2048 is a little different.  Same goes for programming the 14MZ with data from the 9Z.  The rates are not the same.  You will immediately feel it!

Rex Lesher
3117
----- Original Message -----
From: Arch Stafford <mailto:rcpattern at comcast.net> 
To: 'NSRCA Mailing List' <mailto:nsrca-discussion at lists.nsrca.org> 
Sent: Tuesday, January 03, 2006 5:17 PM
Subject: RE: [NSRCA-discussion] 14 mz

I meant increased resolution over 1024 PCM systems.


  _____ 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Arch Stafford
Sent: Tuesday, January 03, 2006 8:15 PM
To: 'NSRCA Mailing List'
Subject: RE: [NSRCA-discussion] 14 mz

I don't know of anywhere selling the 14MZ without the receiver.  Without the G3 2048 receiver though you do not get a lot of the advantages of the 14MZ.  One of the major features is the increased resolution over 2048 PCM systems.  I have only flown my G3 receiver in a sport plane so far.  I do plan when the weather warms up though to fly a flight on my pattern airplane with the G3 receiver, and then immediately put a 149DP 1024 PCM receiver in the plane and test it. 

There is no way to directly transfer data from the 9Z to the 14MZ.

Arch Stafford



  _____ 

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Robert & Casey Green
Sent: Tuesday, January 03, 2006 7:45 PM
To: discussion at nsrca.org
Subject: [NSRCA-discussion] 14 mz

Does anyone know where you can just buy the 14mz only, not the transmitter.  Secondly, can you transfer data from a 9Z WCII to a 14mz.

Thanks in advance!




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


************************************************************************
*PLEASE NOTE*  This email and any attachments may
be confidential. If received in error, please delete all
copies and advise the sender. The reproduction or
dissemination of this email or its attachments is
prohibited without the consent of the sender.

WARNING RE VIRUSES:  Our computer systems sweep
outgoing email to guard against viruses, but no warranty
is given that this email or its attachments are virus free.
Before opening or using attachments, please check for
viruses.  Our liability is limited to the re-supply of any
affected attachments.

Any views expressed in this message are those of the
individual sender, except where the sender expressly,
and with authority, states them to be the views of the
organisation.
************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20060104/5256fe18/attachment-0001.html