[NSRCA-discussion] Some Tools

[Del K. Rykert]

Agreed.. Nice to see his posts again.. 
 
                     Del 
          nsrca - 473
  ----- Original Message ----- 
  From: Karl G. Mueller 
  To: NSRCA Mailing List 
  Sent: Tuesday, January 03, 2006 10:09 AM
  Subject: Re: [NSRCA-discussion] Some Tools


    Bob,

    Where have you been? Haven't seen you post anything for quite a while.


    Karl G. Mueller
    kgamueller at rogers.com



    ----- Original Message ----- 
      From: Bob Pastorello 
      To: nsrca-discussion at lists.nsrca.org 
      Sent: Tuesday, January 03, 2006 7:17 AM
      Subject: [NSRCA-discussion] Some Tools


      Courtesy of Italian friend, Stefano Doni, met on RCU, here are some updates to an old tool on my website
      http://www.rcaerobats.net/DeflectionGauge.htm

      Then - my solution to the drilling of those control hardwood dowels so that the holes will be exactly vertical and match on both L and R elevators/ailerons.  It's easy to make, and works quite well.
      http://www.rcaerobats.net/CG-Yak/ControlDrillGuide.htm

      Bob Pastorello
      www.rcaerobats.net
      rcaerobob at cox.net


--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------
   



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20060103/bde51492/attachment.html