Speaking of Bob, where you been--hiding?!
RS
----- Original Message -----
From: Nat Penton
To: NSRCA Mailing List
Sent: Tuesday, January 03, 2006 11:24 AM
Subject: Re: [NSRCA-discussion] Some Tools
Bob
The deflection guage is simple but ingenious. Thanks
Nat
----- Original Message -----
From: Bob Pastorello
To: nsrca-discussion at lists.nsrca.org
Sent: Tuesday, January 03, 2006 6:17 AM
Subject: [NSRCA-discussion] Some Tools
Courtesy of Italian friend, Stefano Doni, met on RCU, here are some updates to an old tool on my website
http://www.rcaerobats.net/DeflectionGauge.htm
Then - my solution to the drilling of those control hardwood dowels so that the holes will be exactly vertical and match on both L and R elevators/ailerons. It's easy to make, and works quite well.
http://www.rcaerobats.net/CG-Yak/ControlDrillGuide.htm
Bob Pastorello
www.rcaerobats.net
rcaerobob at cox.net
----------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
----------------------------------------------------------------------------
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.7/214 - Release Date: 12/23/2005
------------------------------------------------------------------------------
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.7/214 - Release Date: 12/23/2005
------------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.f3a.us/pipermail/nsrca-discussion/attachments/20060103/689a5c8e/attachment.html