[NSRCA-discussion] YS DZ pump settings

[John Ferrell]

I like that too!

John Ferrell    
http://DixieNC.US

  ----- Original Message ----- 
  From: Grow Pattern 
  To: NSRCA Mailing List 
  Sent: Sunday, February 12, 2006 4:17 PM
  Subject: Re: [NSRCA-discussion] YS DZ pump settings


  My money is on the exhaust valve being coked up and/or the ring sticking.

  Eric.
    ----- Original Message ----- 
    From: John Ferrell 
    To: NSRCA Mailing List 
    Sent: Sunday, February 12, 2006 2:50 PM
    Subject: Re: [NSRCA-discussion] YS DZ pump settings


    Try this before getting too complicated:
    A loose prop will cause back fires. After the first backfire the machined groves are smoothed out on the prop hub. 
    Easy to find out. cut a couple of washers from coarse (80?) sand paper, CA them so the rough side is out and put the assembly between the prop hub and the Spinner. 

    John Ferrell    
    http://DixieNC.US

      ----- Original Message ----- 
      From: Ed Deaver 
      To: NSRCA Mailing List 
      Sent: Saturday, February 11, 2006 10:56 PM
      Subject: [NSRCA-discussion] YS DZ pump settings


      My buddy has a 140DZ and is having problems.  CoolPower 30% Heli fuel, 16.5x12.5W prop, flying at sea level.  

      We had been using Magnum DZ but his header kept getting plugged, so switched fuel.

      Now he is having problems with it backfiring.  He lost his spinner the other day, and another time it was held on only by a thread or so on the spinner bolt.

      He has tried richening up the pump(turning in) and has also tried running it blubbery rich(2.25 turns out)  

      On the ground, it starts easily, runs well he states, then soon as taking off, it begins to run ragged, and recently yeilding 10 of 10 dead sticks.

      Any suggestions??

      Thanx in advance

      ed




--------------------------------------------------------------------------


      _______________________________________________
      NSRCA-discussion mailing list
      NSRCA-discussion at lists.nsrca.org
      http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060212/42ea463c/attachment.html