[NSRCA-discussion] Instrument panel

[Don Ramsey]

Adrian,

Here's a suggestion for the panel.  Use a piece of 1/32 ply and cut holes 
for the instruments.  Glue the panel copy behind the ply and you have a very 
nice piece of work.

Don
----- Original Message ----- 
From: <adriancwong at earthlink.net>
To: <jivey61 at bellsouth.net>; "NSRCA Mailing List" 
<nsrca-discussion at lists.nsrca.org>
Sent: Friday, February 10, 2006 7:45 AM
Subject: Re: [NSRCA-discussion] Instrument panel


> Jim,
>
> Thanks for the attachment. I reduced the size to 45%, and it fits 
> perfectly.
>
> And thanks to all who replied.
>
> Adrian
>
>
>
> -----Original Message-----
>>From: jivey61 at bellsouth.net
>>Sent: Feb 10, 2006 8:24 AM
>>To: adriancwong at earthlink.net, NSRCA Mailing List 
>><nsrca-discussion at lists.nsrca.org>
>>Subject: Re: [NSRCA-discussion] Instrument panel
>>
>>Adrian I sent you attachment for a XS300 panel I have used before.Let me
>>know if you can use it.
>>
>>Jim Ivey
>>----- Original Message ----- 
>>From: <adriancwong at earthlink.net>
>>To: <nsrca-discussion at lists.nsrca.org>
>>Sent: Friday, February 10, 2006 1:45 AM
>>Subject: [NSRCA-discussion] Instrument panel
>>
>>
>>> I am currently putting an Astral XX together with a clear canopy. Any
>>suggestion on where I can get an instrument panel, either the transfer 
>>decal
>>kind, or the one they use for the scale model that will fit the size of a 
>>2
>>meter pattern plane.
>>>
>>> I know I can go to a full scale magazine like "Flying" and cut out a
>>pictue of a panel, but it might not be to scale.
>>>
>>> Thanks to all,
>>>
>>> Adrian
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>