[NSRCA-discussion] Incedence meters

[Adam Glatt]

Stuart, yours is definitely defective.  I just did the same test with 
mine, and it outputs the same value regardless of how it approaches the 
final orientation.
-Adam

Stuart Chale wrote:
>
>
>  
>
> This is the setup I use.  I have 2 short and 2 long bars.
>
> As a side note you can purchase the bars and plastic ends without the 
> meter direct from Robart.
>
>  
>
> The 2 pictures below are the hanger 9 meter portion placed on the same 
> line on my workbench after tilting opposite ways first.  As you can 
> see there is a big difference.  If you always go from the same 
> direction there is more repeatability. 
>
>  
>
> The expensive high quality angle meter is 
> http://www.aeroperfect.com/index.html
>
>  
>
> Stuart
>
>  
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org 
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John 
> Konneker
> Sent: Saturday, December 16, 2006 10:01 AM
> To: nsrca-discussion at lists.nsrca.org
> Subject: [NSRCA-discussion] Incedence meters
>
>  
>
> Over the winter building season I will need to buy an incedence meter.
>
> Can anyone recommend one of the following or...?
>
>  
>
> http://www2.towerhobbies.com/cgi-bin/wti0001p?&W=000727475&I=LXPW71&P=K
>
>  
>
> http://www.horizonhobby.com/Products/Default.aspx?ProdID=HAN192
>
>  
>
> Thanks!
>
> JLK
>
>  
>
> _________________________________________________________________
>
> WIN up to $10,000 in cash or prizes  enter the Microsoft Office Live
>
> Sweepstakes http://clk.atdmt.com/MRT/go/aub0050001581mrt/direct/01/
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>