[NSRCA-discussion] Incedence meters

John Konneker jlkonn at hotmail.com
Sat Dec 16 06:59:08 AKST 2006


Wow!
That is VERY nice!
JLK


>From: "Dave Michael" <davidmichael1 at comcast.net>
>Reply-To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
>To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
>Subject: Re: [NSRCA-discussion] Incedence meters
>Date: Sat, 16 Dec 2006 10:49:36 -0500
>
>Was it this?
>
>http://www.aeroperfect.com/
>
>
>----- Original Message -----
>From: "Stuart Chale" <schale at optonline.net>
>To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
>Sent: Saturday, December 16, 2006 10:13 AM
>Subject: Re: [NSRCA-discussion] Incedence meters
>
>
> >I have not tried the great planes one, however I wasted my money on the
> > Hanger 9 one.  It seems to be a great idea but the fit of the parts and
> > the
> > quality of the meter are so poor that it is impossible to get repeatable
> > measurements.
> > The plastic parts can shift by several degrees in their holder and the
> > electronic meter is off by a few tenths as well each time you move it 
>and
> > place it back on the same surface.
> >
> > I use the standard Robart bars (or long bars) with a Smart Level
> > electronic
> > unit sitting on the bar.  (2 pieces of balsa stock are glued to the 
>sides
> > of
> > the bar to give it a flat surface to sit on.)
> >
> > There is another meter that is a bit expensive (250 or so)  That does 
>not
> > have a bar but is highly accurate and repeatable unit for measuring
> > surface
> > deflections.  The measuring unit is separate from the display unit.  I
> > will
> > have to look to find the name.
> >
> > Stuart
> >
> > -----Original Message-----
> > From: nsrca-discussion-bounces at lists.nsrca.org
> > [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John
> > Konneker
> > Sent: Saturday, December 16, 2006 10:01 AM
> > To: nsrca-discussion at lists.nsrca.org
> > Subject: [NSRCA-discussion] Incedence meters
> >
> > Over the winter building season I will need to buy an incedence meter.
> > Can anyone recommend one of the following or...?
> >
> > http://www2.towerhobbies.com/cgi-bin/wti0001p?&W=000727475&I=LXPW71&P=K
> >
> > http://www.horizonhobby.com/Products/Default.aspx?ProdID=HAN192
> >
> > Thanks!
> > JLK
> >
> > _________________________________________________________________
> > WIN up to $10,000 in cash or prizes  enter the Microsoft Office Live
> > Sweepstakes http://clk.atdmt.com/MRT/go/aub0050001581mrt/direct/01/
> >
> >
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>_______________________________________________
>NSRCA-discussion mailing list
>NSRCA-discussion at lists.nsrca.org
>http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_________________________________________________________________
Get free, personalized commercial-free online radio with MSN Radio powered 
by Pandora http://radio.msn.com/?icid=T002MSN03A07001



More information about the NSRCA-discussion mailing list