[NSRCA-discussion] Paint Mask

[Ron Filteau]

Thanks for the info.

Ron

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pete Cosky
Sent: Thursday, August 24, 2006 2:27 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Paint Mask

I use Flexi. It can cut vector graphics.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ron Filteau
Sent: Thursday, August 24, 2006 2:57 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Paint Mask

Thanks for the info.  I was wondering what program you use for progaming the
cutter.  I have a cad file for the pattern but need to convert it for the
person to cut.  Could you help with this.

Ron

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Pete Cosky
Sent: Wednesday, August 23, 2006 3:49 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] Paint Mask

I use Avery paint mask. Granted I buy 10 or more yards at a time to use in
my vinyl cutter, but it is hands down the easiest to use. 

You can buy it from earlmich.com or if you only need a small piece I'll send
you some.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Kane
Sent: Tuesday, August 22, 2006 8:51 PM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] Paint Mask

I used Badger Foto/Frisket Film to mask the star on
the tail of my Temptation. I created a paper template
for the star, then used it to cut the frisket with a
new x-acto balde. I used both the negative and
positive parts to mask. I sprayed through the nagative
mask to create a white star, then covered the star
with the positive mask and sprayed the red.

I picked up the frisket film at a local art supply
store.

--- Nancy Filteau <filteau at sasktel.net> wrote:

> Hi folks
> 
> Could some tell me the material that they use for
> lettering mask cut outs.
> 
> Ron
> > begin:vcard
> n:Filteau;Ronald
> fn:Ronald Filteau
> version:2.1
> email;internet:filteau at sasktel.net
> end:vcard
> > _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


Bob Kane
getterflash at yahoo.com

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion