[NSRCA-discussion] 14mz questions

Dean Pappas d.pappas at kodeos.com
Tue Aug 22 09:05:24 AKDT 2006


Thanks
 

Dean Pappas 
Sr. Design Engineer 
Kodeos Communications 
111 Corporate Blvd. 
South Plainfield, N.J. 07080 
(908) 222-7817 phone 
(908) 222-2392 fax 
d.pappas at kodeos.com 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Stuart Chale
Sent: Tuesday, August 22, 2006 10:30 AM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] 14mz questions



http://www2.towerhobbies.com/cgi-bin/wti0001p? <http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAEM7> &I=LXAEM7

 

Stu

 


  _____  


From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dean Pappas
Sent: Tuesday, August 22, 2006 9:46 AM
To: NSRCA Mailing List
Subject: Re: [NSRCA-discussion] 14mz questions

 

Hi Stu,

Do you have a Tower part number for those springs?

thanks,

    Dean

 

Dean Pappas 
Sr. Design Engineer 
Kodeos Communications 
111 Corporate Blvd. 
South Plainfield, N.J. 07080 
(908) 222-7817 phone 
(908) 222-2392 fax 
d.pappas at kodeos.com 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Stuart Chale
Sent: Monday, August 21, 2006 8:00 PM
To: 'NSRCA Mailing List'
Subject: Re: [NSRCA-discussion] 14mz questions

I have also used the Sony battery.  It is nice to have a spare in my transmitter box.  One time I went to fly and didn't check the battery.  Probably 2 or 3 seconds after breaking ground first flight of the day, this loud alarm goes off.  Non stop beeping.  Quickly land the plane (less than perfect landing and I wasn't going around again) Turns out the battery was at 25% I think.  The second pack allowed me to continue flying.

 

I have also changed the springs.  I like Tony at Radio South but I would recommend the futaba heavy springs available from Tower for under $3.  They are bent better than the ones Tony sells and not as stiff.  Sort of between stock and his.  The ends are bent better to make installation easier.  I would say similar in complexity to the 9Z.

 

Stuart

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060822/ee72566d/attachment-0001.html 


More information about the NSRCA-discussion mailing list