[NSRCA-discussion] 14mz questions

[Rex LESHER]

Ed
1.  I have used the DSC with the cord plugged into the B/C slot in the receiver, and I assume one would have to use a Y-harness for the ability to use it once mounted in the plane after set up.  The 5014DPS receiver doesn't have a separate slot for the DPS harness...
2.  Yes the other charger is the CR-2500, which is 12V....    
3.  I can't help ya there...  I ordered mine with the stiff springs    
4.  So far, I haven't found another source for the battery, other than Futaba....  Believe me, I've looked a lot!!!  I guess I should have believed what I read...  "This battery is only available from Futaba".

Rex Lesher
  ----- Original Message ----- 
  From: Ed Miller<mailto:edbon85 at charter.net> 
  To: NSRCA Mailing List<mailto:NSRCA-discussion at lists.nsrca.org> 
  Sent: Monday, August 21, 2006 3:04 PM
  Subject: [NSRCA-discussion] 14mz questions


  Just received my 14MZ and have a few questions.

  1. Does the fuse mount DSC receptacle that came with the 9Z series radios 
  work on the 14MZ ??
  2. To charge the TX battery in the TX, does it require a different charger 
  ?? It appears so.
  3. Has anyone replaced the stick springs themselves ?? Is it easier or 
  harder than the 9Z ??
  4. The TX battery, is there anything else available commercially or do I 
  need to buy a spare from Futaba ??

  TIA...Ed M. 
  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org<mailto:NSRCA-discussion at lists.nsrca.org>
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion<http://lists.nsrca.org/mailman/listinfo/nsrca-discussion>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060821/516e71b0/attachment.html