[NSRCA-discussion] Prop Covers

[T&C Brown]

Keith,

Vel-Tye might have what your looking for.

http://www.veltye.com/rc_modeling?b=1

T-Bone

  ----- Original Message ----- 
  From: jivey61 at bellsouth.net 
  To: NSRCA Mailing List 
  Sent: Friday, August 18, 2006 8:59 PM
  Subject: Re: [NSRCA-discussion] Prop Covers


  Keith
  Go to Home Depot and buy some water pipe insulation. Cut the length to fit each blade and wrap tape about an inch from both ends to keep it from splitting. Slide on and off,or start the engine and they automatically come off.

  Jim Ivey
    ----- Original Message ----- 
    From: Keith Hoard 
    To: NSRCA Mailing List 
    Sent: Friday, August 18, 2006 6:52 PM
    Subject: [NSRCA-discussion] Prop Covers


    Anybody know where I can get prop covers for APC props?  

    -- 

    Keith Hoard
    Collierville, TN
    khoard at gmail.com




----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20060819/062597b8/attachment.html