[NSRCA-discussion] Robart air can leak

[Del K. Rykert]

Depending on how thick the material might be able to braze? 
 
    Del

----- Original Message ----- 
From: "Jay Marshall" <lightfoot at sc.rr.com>
To: "'NSRCA Mailing List'" <nsrca-discussion at lists.nsrca.org>
Sent: Sunday, April 30, 2006 8:39 AM
Subject: Re: [NSRCA-discussion] Robart air can leak


> Solder won't work for sure - you can't solder AL.
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bob Kane
> Sent: Sunday, April 30, 2006 8:08 AM
> To: NSRCA Mailing List
> Subject: Re: [NSRCA-discussion] Robart air can leak
> 
> That's what I thought, solder is not going to work.
> Try the JB Weld, or the special bubble gum Mike
> mentioned ;)
> 
> --- Ken Thompson <mrandmrst at comcast.net> wrote:
> 
>> It's made of aluminum, I've already scuffed the
>> area, I will get the JB for 
>> aluminum and try it out.  I'll just test it out real
>> good before I 
>> re-install it.
>> 
>> I also got a hint of using Hubba Bubba bubble gum,
>> that sounds like a tasty 
>> attempt also.
>> 
>> Ken
>> ----- Original Message ----- 
>> From: "Bob Kane" <getterflash at yahoo.com>
>> To: "NSRCA Mailing List"
>> <nsrca-discussion at lists.nsrca.org>
>> Sent: Saturday, April 29, 2006 9:36 PM
>> Subject: Re: [NSRCA-discussion] Robart air can leak
>> 
>> 
>> > What is the can made of?  I think JB Weld would
>> work
>> > if you get the area clean.
>> >
>> > --- Ken Thompson <mrandmrst at comcast.net> wrote:
>> >
>> >> Does anybody have any clue how I can repair a
>> >> pinhole leak in a Robart air cylinder?
>> >>
>> >> For some reason there is a tiny leak in the side
>> of
>> >> the can.  Solder and silver solder won't hold
>> >> pressure.  I thought about JB weld for aluminum,
>> but
>> >> I'm not sure that will hold 80 to 100 PSI either.
>> >>
>> >> Any hints would be helpful, TIA.
>> >>
>> >> Ken>
>> _______________________________________________
>> >> NSRCA-discussion mailing list
>> >> NSRCA-discussion at lists.nsrca.org
>> >>
>> >
>>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> >
>> >
>> > Bob Kane
>> > getterflash at yahoo.com
>> >
>> > __________________________________________________
>> > Do You Yahoo!?
>> > Tired of spam?  Yahoo! Mail has the best spam
>> protection around
>> > http://mail.yahoo.com
>> > _______________________________________________
>> > NSRCA-discussion mailing list
>> > NSRCA-discussion at lists.nsrca.org
>> >
>>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> 
>> 
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> 
> 
> 
> Bob Kane
> getterflash at yahoo.com
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>